Right then, before we go on to discuss these key strengths, also explaining why we were so thrilled about this company and still are, just a reminder of the principles of how we structured this SPAC, with the view of supporting the shareholders. Potentially, decisions at the AGM. The first principle was that the SPAC investors have the right to redeem 100% of their investment at this SPAC. And that right then has to be exercised at the AGM. The second principle was that, before the AGM, with certain exceptions, there was no cost for our shareholders, i.e. Us and the sponsors invested the risk capital to cover the target search, the diligence advisor, and the SPAC listing expenses. Uh, back to 2021. The third one was aligned incentives, which is reflected in the principle that us as the sponsor team, and the management, will not earn anything before our SPAC is back. Investors earn value appreciation, which is shown on the thresholds for us to convert our B shares to A shares. And that's a very important principle of aligned incentives. The last one, which we are now discussing, is then subject to approval. Um, are you accepting the transaction? We will then launch the second value creation phase, if you like, of our, I have to say, exceptional SPAC structure, which is the long commitment to the target company, i.e. We have within our team a 24-month lock-up period for ourselves from the closing, i.e., from September onwards. That's the time which formally reflects our interest in the company and our commitment. We have until our lock-up period expires. We have a right. And when we say B, that means the sponsor group has the right to nominate two board members. Uh, and in there, those board members were upheld, who will also be acting as the chairman of the new board, and myself on the board. But that's only part of the picture. Uh, we have discussed in many perspectives with the company and the management how we would kind of organize more informal support for them, which means providing support in different areas where we, as a team, hold expertise; this is then subject to the company board and company management. But we think that we have something to contribute to the management in this respect. Uh, but that's for them to decide.
But the point is that we are not going anywhere after the completion, but remain with the company. The support, uh, starts in the first month as a listed company. Uh, as you know, there are lots of things that are new to a private company management and some of the board members, uh, regarding how to act as a public company. Uh, we will certainly support them there. And then, uh, in the actual value creation going forward.
Okay. Uh, then if we go to Canatu, and what are the country's key strengths? Uh, as we have said, we looked at Canatu first in 2021, when we actually sort of knew that the technology was a strong suit for Canatu as such. But when we saw at that time a company which is fairly small, and which was focused on automotive applications, then we thought that, okay, probably it's not for the advanced carbon nanotubes at this time for us as a target company. Uh, but then we revisited. So, the deep technology companies in 2023, about a year ago, a bit less.
Uh, we kind of started to hear very good things about Canatu, and that was in connection with this entrance to another business area, which is by far the largest business in 2023. Uh, it's 80%. Uh, i.e. the semiconductor business and semiconductor technology. Kind of supporting one of the most important technologies in the world, which is EUVL (Extreme Ultraviolet Lithography), the only technology to make the most advanced semiconductors in the world. So what we see as, essentially, is a platform for advanced carbon nanotubes.
So we think that it's a technology platform that can support many applications. Now it has three areas, i.e. uh, semiconductor, automotive, and medical diagnostics that the focus is on. And also, when it's a deep technology company, this means that the barriers to entry are obviously high. So, this was the first reflection from ourselves.
And when we looked at it about a year ago, we started looking again in earnest and then, after quite a long time interacting with the management, And the owners ended up signing with Canatu's shareholders in July. But if you go into these traits, we have listed eight of those here. Uh, first of all, it's a rapidly growing company with attractive margins. Uh, and as a deep technology company, it often has a different kind of financial profile. This was one of the key factors that differentiated this company from others, as it has already demonstrated its ability to grow. Uh, obviously still quite limited numbers. One might say that from that perspective, they are growing very fast. And also the margin potential when providing products that have high value for its clients. The second point was that, as we have always said, there has to be a large enough market to support the growth. Now, discussing the current three markets is always a difficult question to define. It is the addressable market, but with a different kind of triangulation and third-party help. These markets are estimated to grow between 2 to 4 billion by 2030, which we think is very supportive for our value creation. Then obviously, the proof is in the pudding. What kind of customer relations do you have, and what types of customers do you serve? We can clearly state that the customer relationships we have established are with what one would call leading global companies. In our model, technology is obviously a key enabler. In Canada, we discovered a differentiated technology, first of all. Differentiate the company from its competitors, or at least some of its competitors. And then also there is IPR protection, which together supports a strong competitive position for it. The fifth element presented here, along with the cash flow profile, was probably the most deviating factor from others. A key point discussed was that Canatu has been mass manufacturing its product since 2015. In the automotive sector, and from 2021 for the semiconductor, which is remarkable for a deep technology company, as you don't see that many times. Quite a difficult obstacle to overcome is transitioning from limited manufacturing to mass manufacturing. That hurdle, in this application, has already been overcome by Canatu. Obviously, the term 'mass manufacturing' may be a bit misleading here because the company last year produced, in C and D sheets, less than half a kilo of products, but still, the business model, we found, is scalable. Asset-light, obviously, it's still a manufacturing company. There is Capital Expenditure, known as CapEx. However, they are still fairly limited when considering the output. And then, as I said, when you have products that produce high value for your clients, let's take for instance, the sheets used to prevent particles from entering the semiconductor patterned masks, or the heaters that enable more autonomous driving. You're obviously supporting the client's advanced needs in this way. They are creating value add, which then supports high margin potential.
Although it's a fitness company, it's very international, with over 30 nationalities in the company working together towards common goals. An experienced management team which has already been tested in various companies and areas. The eighth point is obviously a result of the previous seven, so the long-term financial target for 2027 includes revenue of over 100 million and an adjusted EBIT margin of over 30%. This kind of target is quite supportive for our case. Let's go through the points one by one, flipping the slides, allowing for a potential Q&A session, which may be the most fruitful part of this presentation. Okay. Rapid growth, attractive margins. If you look at the KGaA from 2020 to 2023, it's over 100%. Obviously, it has to be when the underlying numbers are small. But still, when thinking about the last year and the guidance for this year by Canatu, which is 20 to 25 million. You can see that the growth is in good speed.
As we look at the gross margin, which for us is obviously the key factor for scalability or the underlying ability of the company to create cash flows. Last year it was at a good level, i.e., plus 70% at the EBITAM level last year versus a 0.3 million positive, but that includes a certain amount of public subsidy. So that's not the operative EBITDA entirely but it is rapidly growing. It has attractive margins.
Deep Technology, obviously has a higher barrier to entry. The more the markets are established, they are sort of big enough in the semiconductor. The key drivers, as mentioned, include increasing demand for high-end semiconductors, EUVL semiconductors, and there's high value potential for the EUVL process. By Canatu, here we had different types of scenarios which are more or less based on the adoption by the customers of the CNT pellicles in the high-power EUVL machines. So in the so-called selective adoption, which is adoption in logic semiconductors and limited adoption in memory and primarily in high-power EUVL machines.
That would be around 1 billion by the time of 2030, and in a more widespread adoption, it would then actually double from here. One point to mention, as we have put there because of the two products in each of these segments that Canatu produces, first of all, the reactor to make this, i.e., the machinery to make the synthesis, which, many of the IPs also relate to, and then secondly, the actual CNT sheets and the CNT sheets, when we talk about the lithography machinery in the EUVL process, they are called pinnacles. So, if, as we have said, if the demand for the pellicles, which is a large market, would be satisfied with the effective C and D reactor sales only, the market size is harder to triangulate.
But what we have said it would be materially lower, i.e., hundreds of millions of euros. But then the recurring revenue part of Canatu would be a large portion on automotive. The drivers are the increasing adoption of autonomous driving, and actual battery electric vehicles when we talk about windshields, and the fact that the CNT-based heaters offer higher value with high-value potential for both applications, and here, the market study more or less that we conducted showed that it would be around an 800 million market by 2030,
in which the windshield heaters would be a larger market, around 600 million or so and 200 million or so for the LiDAR or camera heaters that are now in production. The windshield heaters would need further investment by the company, which is under investigation. Because the company would have to make a larger reactor or reactor that can produce wider CNT sheets. And then there's medical diagnostics, which still is in the early phases. But the driver, supported by the studies also, is the growing point-of-care medical diagnostics, which can be more cost-effective and faster for the clients when and if shown in the field. And here, Canatu's offering is the very high sensitivity of Canatu CNT, which then would replace the current point-of-care platforms like platinum, carbon-based or gold, also because it's so much more sensitive than the current ones. Uh, then kind of open up new markets in here.
There were only three applications for the medical diagnostics. Both breast and lung cancer, and the paracetamol tests, which represent a fairly small market, a very small market. But that's the test market that cannot afford the kind of failure it starts from and then expands to other possibilities. But this is in the early phases. In 2023, there were virtually no revenues from medical diagnostics; automotive accounted for about 20%, and semiconductor about 80%. There are a universe of potential customers, and some of them are not just customers. It's a very sensitive area, both in semiconductor, automotive, and potentially in medical diagnostics, which are actually Canatu's customers. So the company has chosen to disclose this universe from which the investors can see the customers. The customer group is composed of globally leading entities, and obviously, the company states that these customers are globally leading. It's very hard to disclose more without jeopardizing Canatu's business prospects going forward, i.e., hurting the interests of our shareholders. But in semiconductors, you can see the list kind of includes. More or less all the usual suspects can be seen in that field. It's actually quite a concentrated business in itself. There are not many companies in the field. They have a high demand for the product. So, let's say, on one hand, there's obviously a risk for Canatu Oy in having a concentrated customer base, but also a possibility because it does. Customers require higher quality and advanced capabilities for their products. Automotive is such a larger one.
Obviously, OEMs are there with different kinds of subsystems or component suppliers that can be potential customers here for the heaters and possibly for the windshields and seats in the future. In medical diagnostics, it's crucial to maintain accuracy and precision. Perhaps again, a more defined group in, let's say, the human side of things. Companies such as Siemens, Roche, or Thermo Fisher would be the partners who, together with Canatu, take the products to market. If they prove to be as effective as believed. But these are the customer groups. We are satisfied from that perspective, that the customers there are indeed leading global ones in technology. The two main technologies are classed as C and D, which involve a process known as wet dispersion. And then, which is on the opposite, called dry deposition. Canada is one of the pioneers of the dry deposition method, which includes significantly fewer process steps. From a theoretical point of view, it provides wider and longer carbon nanotube (CNT) fibers. Which then translates to higher mechanical strength. In Canada's case, as mentioned, there's protected technology with patents and trade secrets. Uh, the way this person from the other end is perceived by some competitors of Canada, as far as we know. From the company's perspective, advanced CNT technology is regarded as a more difficult field. Well, this is not to say that this person cannot be relevant in some applications, and a tough competitor indeed. They do have, say, lots of belief in their own technology, which is also shown in this slide from the perspective of process steps. We talked about the proven mass manufacturing capability, which is based on a larger reactor, the heart of mass manufacturing, because the magic happens there. Properties of materials such as conductivity and mechanical strength can vary significantly between different applications. That's a part of Canatu's technology and knowledge. Also, as mentioned, already over one million touch sensors have been manufactured with no material field returns. And on the other side of things, i.e., The other product line, if you like, saw the first Carbon Nanotubes (CNT) reactor sales agreed in 2023 and to be delivered in 2024. We saw this as quite high in our criteria, as mentioned, because many times it's tough to achieve mass manufacturing in these kinds of technologies. We believe that it's a significant strength to be able to commit to manufacturing in high volumes for large customers, as this is essential for establishing a solid foundation. Um, we talked about the business model. Um, I actually have two business lines here. It's illustrated through the semiconductor business. I even kind of do, say, selling C and D reactors. It secures the hardware. Uh, revenue for the quarter. And then there's technology licensing, which serves as a base for the royalty payments and the different catalyst consumables that are needed to run the reactor properly. On the right-hand side of the slide, you can see the inspection consumables which Canatu Oy produces. They manufacture the CNT membranes and sheets in their own reactors and then deliver them directly to the clients. Both businesses enable high-margin potential. As mentioned earlier, it is a technology company with a high barrier to entry. We discussed the attraction of talent to the company, which is obviously one of the key investment drivers. We have to believe that there is a company, which is ideally positioned within the field of technology, that can actually attract people. The management can effectively handle that. They included various kinds of people. And it seems to be going well, as mentioned, with people from around 30 countries, 127 employees, out of which about 20% hold doctorates or are doctoral candidates. Now turning to Mikko to go through the financial targets for 2027.