Inderes’ Disclaimer can be found here. Detailed information about each share actively monitored by Inderes is available on the company-specific pages on Inderes’ website. © Inderes Oyj. All rights reserved.
Read transcripts of webcasts and audiocasts
Read transcripts of webcasts and audiocasts
Disclaimer: This is a machine-generated transcript and may contain inaccuracies.
Welcome everybody to Ferronordic's Capital Markets Day. Welcome to all of you who have joined us here on-site in Stockholm, and to those of you joining us online. We're very happy. Um, thank you for your interest in our company. My name is Erik Danemar. I'm the group CFO at Ferronordic and also the head of investor relations. I want to start by presenting today's speakers. Uh, we have our president and CEO, uh, Lars Corneliusson speaking with us today and Henrik Carlborg, our head of business development. We also have Vic Green. The president of Rudd Equipment Company. He's joining us online, as is Koen van Imschoot, who is our aftermarket business director in Germany. And then, of course, yours truly as well, here on site. Today's program is about three hours. After my opening remarks, I will give the floor to our CEO to give an overview of what Ferronordic is today. Thereafter, Henrik will delve deeper into our thinking on M&A strategy. Thereafter, we'll move to look more specifically at the markets and operations. We'll start with the US, and that will be presented by Henrik together with Vic Green joining again online from the US. Thereafter, we will have a break at approximately 2:20. We'll see how that progresses. But a ten-minute break for refreshments and then we'll reconvene. And at that point, Lars and Koen will start to present our German business. And thereafter, I will present the last section, which is the financial performance and our financial objectives. We have two people joining online. And to make things easier, after their respective presentations, we will take questions for them. So for those of you who are here, please consider questions that are more specific for them at that point. For those of you who are online, please consider this also as you submit questions on the registration page. Uh, great. You can help me a bit as the moderator if you mark it, uh, US or Germany or even Vic or Co, and it makes it easier for me to find the question for them. Otherwise, the rest of the questions will be left to the end of the sessions for the last 30 minutes. And with that, I'll give the floor to Ferronordic's CEO, Lars Corneliusson.
All right. Thank you, Erik. And also from me, a very warm welcome to this Capital Markets Day. Uh, both here in Stockholm and online. I want to present a bit about what Ferronordic is today, a bit about the background, but mainly, how we appear and what we stand for. And also, first of all, I would like to explain Ferronordic as an investment theme. These topics that we are discussing now, we will revisit and elaborate on throughout the presentation. Why is Ferronordic a good investment? We have a robust and scalable business model. We have a strong brand portfolio and very good OEM relationships. Sustainability is an integrated part of our business model, where we are very well positioned to benefit from trends in electrification, infrastructure investments, and shared assets models. We will also talk about how we are poised for organic growth and bolt-on acquisitions in the US, a strong market with growth potential in Germany. It's a turnaround case that will capture recovery and, obviously, the network brand, product extension, and opportunities. We're open for strategic M&A, and we have a very experienced management team to execute this. We are certain that this will create value and dividend potential. We will create a stronger balance sheet. We will improve cash flows and enhance growth margins. So, very quickly, we were founded in 2010. We're headquartered in Stockholm. Since 2017, we have been listed on Nasdaq Stockholm. We have today 814 employees across three markets, which include Kazakhstan. It's Germany and the United States. We have 40 sales and service locations, and we have a long-term revenue of roughly 5 billion kronor over the last 12 months. Kazakhstan is a part of our business. We will not discuss it extensively. It's a smaller part. It represents only 4% of our revenue today. So we will focus on the big revenue drivers, which are the United States and Germany today. Some of the background for those of you who have been with us since the beginning, you know that we were founded in 2010 when we acquired the Volvo Construction Equipment Distribution in Russia, and we expanded significantly. We developed a lot. We started with six outlets. We ended up with more than 80 outlets. By the time the war came, we had 1500 employees. And during that time, we developed into a very high-performing company and a top-performing dealer for the brands that we represented. We were awarded the Volvo Dealer of the Year, etc., etc., and we had a good run in Russia. And, thanks to that, it obviously made it possible for us to make an IPO and get our shares listed in Stockholm in 2017. It also gave us an opportunity to move outside of Russia. We then became the authorised dealer for Volvo CE in Kazakhstan at the end of 2018, and subsequently expanded to become the biggest independent dealer for Volvo and Renault Trucks in Germany in 2020. We have roughly 18% of the German market. So, essentially, the foundation of what we have been doing for many years, as Ferronordic, was based in Russia, but as we all know, something happened there, and we were unfortunately forced to exit the market, yet we managed to do so very successfully. I mean, we did that by selling—and now I mean selling—the assets we had, we got the net asset value out from Russia, and not only did we sell the business, which was one thing, but the most difficult aspect was actually getting the money out of Russia. And we did that. It was a very intense year in 2022. Believe me, before that happened. But the day before Christmas in 2022, we got out and, of course, before that, we had already embarked on a mission to see where we should go next. We had the capabilities, we had the experience. We had the relationships with our partners, suppliers, and we then, in less than a year, actually concluded the acquisition of Rudd Equipment Company, which is one of the largest dealers for Volvo construction equipment in the United States. So that's where we are now. The business model is very simple. I mean, it's not rocket science. We create new opportunities by selling new equipment and trucks, and renting them out, primarily to provide service and parts sales, complete with service agreements and overhauls. This concludes the cycle with either sales to customers or major component rebuild sales, but we also perform rebuilds. This is mainly for all the construction equipment. When we actually rebuild old machines and make them new, we give them a new life. Obviously, we are buying used equipment from other markets into our sales area, and we are trading used equipment outside our sales area. For instance, if we make a trade-in with our competing brand, we would like them to get out of our area. We would like to keep our brands in our territory now. So let's go back again and say this is how a dealer works. So it's not what you do; it's actually how you do it. It's not what you do, it's actually how you do it. And we have a very strong vision, value, and strategic cornerstone mentality. Everybody knows this pyramid, even the customers, which is good. And our vision is to be the leading service and sales company in our markets. And here there are two words that are more important than the others. And the first one is service, which comes before sales. We conduct sales services in order to excel on the service side, creating customer loyalty and ensuring repeat customers who provide us with more business in both the aftermarket and, of course, in repeat sales. The second one is leading. We want to be leading. It doesn't mean that we need to be the biggest, but we should be the best. Our customers deserve that. We represent strong brands, but they are only as strong as the support and the relationships that we have with our customers. And again, who is the referee when it comes to deciding who is leading in our industry? Well, obviously, it's the customer and the customers. So in order for us to reach our vision, our mission has to be to support the growth and leadership of our customers. We will talk a lot about that today, how we do that, and how we can support our customers to grow and by that, grow ourselves. Our values and operating principles are respect. And by that we mean respect within a company and, of course, towards everybody outside the company. We work with quality, meaning that we perform to very high standards for our customers every time. So we actually live up to customer expectations. But the most important thing is that we work with excellence. So we actually overperform on customer expectations. And our strategic cornerstones are a great team. Customer centricity, building on strong brands and operational excellence. Our strategic objectives. Service and parts absorption rate of at least one. Meaning that the gross profit we make from selling parts and services should cover our fixed costs. That has been with us since we started. We've been in volatile markets. We've seen ups and downs and handled them in a good way, I think. But it means that we need to make sure that the aftermarket and servicing parts business covers our fixed costs. We should be able to survive without selling a single new piece of equipment or truck. Again, leadership in the market for construction equipment and trucks. Again, the customer. Customer satisfaction is what we emphasize when discussing expansion into related business areas. Obviously, we want to use the network that we have to be able to add complementary brands to the brands that we're already representing. Sustainable transport services. We will discuss more about what we mean by that. But we see new trends in the industry where this is clearly something that we want to catch and actually drive that development. Industry leading digital service and sales platforms mean that we should be at the forefront of how we engage and proactively service customers, not only servicing but also selling machines and trucks to them, and driving geographic expansion. So for those of you who've been with us for a while, you've seen those strategic objectives. Um, but sustainable transport services is something we've added now. A great team, indicative of our people-centric business where dealing with people is central. This is the most important thing that we do. We want experienced management. We want to have agile sales teams that can react to different trends and identify opportunities where others don't. We want to have top industry technicians. Technicians in our industry are rare and difficult to find and keep. Really, attracting and retaining technicians is one of the most significant challenges our industry faces. We want to have a flat and flexible organization. And in order for that to happen, we are following a cycle of recruitment, selection, and onboarding, performance management focus, extensive training and development, talent management, and succession planning in our industry. This is extremely important for succession planning and how we handle it, as well as reward management, which looks different compared to the environment we were used to. Today, in the various environments we operate in, we have to approach these matters differently. But it's extremely important, and obviously, putting that all together into designing effective organizational structures. And if you can do this effectively, you actually create a great team. And that's what it's all about. It's the people out there that are doing the business. It's the people out there who are keeping the contacts with the customers and making sure that they can develop and grow, and so will we. We definitely want to be at the forefront when it comes to everything about sustainability. We have conducted a double materiality analysis in 2024. We are preparing for the Aker's reporting line, and we conduct a footprint and impact analysis to set our sustainability objectives. Just a few examples. 16 out of 22 workshops in Germany were certified. Certified for renewable energy in 2023. Now, electric trucks accounted for 2.7% of sales in Germany in the first six months of 2024, versus 1.7% previously. One might say it's not a lot. It's not, but we're moving in the right direction. We're focusing a lot on the ESG aspects, which predominantly involves helping customers decarbonize—an integral part of our job, as it drives operational efficiency and contributes to the circular economy. We want to, for instance, drive and develop further, rebuild, etc., and of course, focus on building an efficient infrastructure. And we've put a lot of focus on health and safety, involving not only measurements but also training in general and specifically on safety aspects. So I think that has been with us for a long time. And we are very committed to driving. We want to drive this and see it as a huge competitive advantage for us if we can truly handle sustainability in the way we aim to do it. Now, building strong brands, we talked about. So these are the brands that we represent today. We represent Volvo CE in the United States and Kazakhstan, Volvo Trucks, and Renault Trucks in Germany. We also have Hitachi excavators and rigid haulers in the US, Link-Belt cranes in the US, and Sandvik, Bergmann, and McCulloch backhoe loaders. So these are the brands we represent. We are very proud to do so. And it fits into our vision of striving to be the best. We have very good products that we are representing and which we want to represent in the best way we can. Now, what we see in the industry, clearly now and going forward, is the green transition. There's a lot of talk about what's going on, but it's clear that there is no way it's not going to happen. There is a strategy to reduce CO2 emissions and to transform the mobility industry. And there is no doubt about it. We, as you know, for instance, in the US, a lot of focus on infrastructure investments is driven by the need to upgrade existing infrastructure and by using new technologies. We will discuss that in detail when we get to the US section. And we also see a strong shift in ownership models that customers demand, relating to whether they own machines or opt for what's known as equipment as a service. This model provides flexibility where we offer trucks and equipment on a flexible rental, subscription basis, or pay-per-use, and at times even pay per ton, pay per kilometer, etc. This is a trend we anticipate will grow, and we strive to excel in it. And, the executive team to do that is myself, Henrik, you will see soon. See? Sorry. I misspoke, talking about Nadia, similar to our discussion. Who's our human resources director. Erik Danemar is our head of general counsel and head of treasury, commercial director owner. And Anton Karpov is the director of rental and used business. And the names that have a Russian tone are mainly working with the German market. Voice to them. They're mainly working with the German market. This is the board of directors. Very diverse and extremely capable. Engaged board of directors. We have our eye on you for the chairman position. He used to be the head of all trucks for many years. And that building ramp. She has a career in communications. She's also the chairman of the board of stores and, for instance, myself. Håkan Eriksson is a main representative of our major shareholder, Aurora Tech, focusing on sustainability, and is an esteemed member of the board. Niklas Florén, who is actively engaged, also contributes significantly. He's the managing director of Wireless Cars. Henrik will now talk a little about our M&A strategy. So please go ahead, Henrik, and I'll leave that bit.
Thank you, Lars. The financial objectives that we have are based on our business as it stands today within the current geographies. But of course, we also consider other opportunities to grow through acquisitions. We are open to entering completely new markets. We don't really shy away from anything. And we will look for opportunities in an opportunistic manner. But the main idea is to leverage what we have. So the focus at the moment is really to dig where we stand and look at bolt-on acquisitions in the markets we are operating in today. I will start to talk about, say, the softer criteria when it comes to evaluating targets, potential targets. The key aspect is really a common culture and shared values. Lars discussed our value pyramid, where our vision is to become the leading service and sales company in our markets. Our mission is to support the leadership and growth of our customers. We can build a culture over time, but it takes a lot of effort and time to do that. We don't particularly mind if the companies we acquire are not very sophisticated in terms of commercial processes or personnel structure. But that's something we bring to the party and something we can fix. There needs to be a high level of customer centricity in the companies we buy. There needs to be potential to add value. Meaning, with our history and experience. We are experts in running dealerships. We need to be able to use that experience. We need to be able to use the resources we have to benefit and professionalize the companies that we would acquire. There needs to be growth potential in the companies we look at. The key now is really to find companies that generate profit and cash flow. So they would be more or less mature. But there needs to be an upside in these companies for us to be interested. And of course, scale advantages. Scale is important to reduce our per unit cost. As we grow bigger, our purchasing power improves, and logically, the cost for every piece of equipment we purchase and resell will be reduced. We have great teams centrally and in our market. And we need to use these teams and the resources we have to professionalize the acquired companies that we look at. By gaining scale, we also enhance the utilization of the existing resources we have. Some examples of this involve Rudd, in this case, in the US where we have two amazing training centers with full-time training personnel. We use them to run institutionalized apprentice programs for entry-level technicians. We use them to develop the technicians we have and all the way until they are certified masters. This is something that Rod has that other dealers don't have. If we acquire more dealerships in the United States. We can use these training resources to train technicians from these dealerships as well. So we benefit the acquired dealerships. At the same time, we get a better utilization of the training resources we have, and we reduce the cost per training hour, and the entire cost of the training center as a percentage of our total business will go down. In the US, we also have a central parts warehouse and an in-house freight system. We have this to ensure very high parts availability without the need to store too much inventory locally in our branches. It also enables us to share very expensive special tools between the locations we have. So you don't need to have these special tools in every location, but we can share them and ship them around easily if we add more brands to our network, or if we buy more dealerships, we can use the central parts warehouse and the internal freight system to benefit those dealerships as well. And this means more business, higher utilization, and lower costs for this whole setup as a percentage of our total revenue. Looking at the stricter M&A criteria. They should be value accretive to our total business if we buy companies, meaning that the return on invested capital and the earnings per share should increase when we do an acquisition. Now, the target from the onset is at least that the ROIC from day one should be higher than our cost of capital. Within a two-year period. We should at least achieve double-digit growth in the businesses we buy within a three-year period. The returns we look for should be higher than the ROI which we have in our financial targets. The businesses we buy should have high free cash flow to deleverage and support further growth. This means that at the moment we are looking predominantly at mature companies, and we are less interested in turnaround opportunities. Now, why did we enter the United States? We looked at several geographies. During this time, we have a strategic objective to grow and expand geographically. Geographically, and we looked at several geographies. The US really stands out as particularly interesting to our industry. First of all, there is a consolidation of the Volvo dealer network occurring in the United States. So that's why we started looking at this from the beginning. It's also important to note that the United States is the second largest construction equipment market in the world, following China. The demand for machines is expected to remain high. I will talk a bit more about that shortly, but the demand for machines is expected to stay high, more or less, regardless of what happens to the general economy. We felt that this is a market where our experience and history can really make a difference. So, coming back to why we believe that demand for construction equipment will remain high in the United States. 1 in 5 miles of highways or larger roads in the United States is classified as in poor condition. So with over 43,000 bridges, the need to upgrade the United States infrastructure is immense. Now, there are political programs in place to enable infrastructure investments. The most extensive and well-known program is the Infrastructure Investment and Jobs Act (IJA), which provides a total of $1.2 trillion over five years. An important thing about this program is that it's also bipartisan, so it's supported by both political parties. So it's expected to remain regardless of what happens in the elections. In total, as of today, there are a little bit under $600 billion in announced federally supported projects. And in our territory, the territory covered by Rudd Equipment Company, the corresponding figure is $81 billion. These programs typically require matching funds from the participating states or the companies that are running the project. So the actual amount available for infrastructure investments should be much larger than these federal programs cover. So we will not speculate here today how much this means in terms of additional market potential. But it's fair to say that this is where we based our expectation that the demand for construction equipment in the United States will remain at least as high as it is today. So why did we buy Rudd Equipment Company? Coming back to our soft criteria and our hard criteria. Rod has a culture that matches the Nordic culture one-to-one. It is a leading service and sales company in its market. It has a very high customer-centric culture. We had strategic alignment. It's a large dealer with new capabilities and know-how. I mentioned the training centers, the warehouse, and a lot of really good things that exist in this company. On the quantitative side, Rudd Equipment Company has a history of solid profit generation and solid cash flows, and we think we bought it for a reasonable valuation. There are significant scale advantages here. Rod is an excellent base for continuing our expansion in the US market. It's also a good network that we can leverage to add additional projects going forward. Products and services going forward, which Vic will talk about later. We see a lot of growth potential in Rod today. Our market share, particularly for excavators, is low. We see a big opportunity to grow the market share for excavators for both Volvo CE and Hitachi. We also don't think we have reached nearly our full potential when it comes to profitable service and parts sales. So now we will talk about the US, the US market, and our US operations more specifically. And this will be done by, or the president of Rudd Equipment. Mr. Vic Green speaking to us directly from our US headquarters in Louisville, Kentucky. Vic.
Thank you, Henrik. It's a pleasure to be here and join you online. Good afternoon to everyone there. First of all, on behalf of everyone at Rudd Equipment Company, I would like to mention the excitement that is still in place from the acquisition by Ferronordic last year. We're ten months into it, and you can still sense the excitement around the company. I would like to go through the history of Rudd Equipment Company, introduce you a little bit to who we are. There's been a lot of discussion about the culture. We believe it's very important to who we are. And we also think that it's been a perfect match with Ferronordic. We identify with it and it represents many of the same values. So, it's been a great ten months for us so far. This year marks our 72nd anniversary. Henrik, could you please go to the next slide? Thank you. This is our 72nd anniversary. Mason Rudd founded the company in 1952. He moved his family to Louisville. At that time, the Clark, Michigan product was the leading product for the company. Uh, kind of the flagship product, if you will. The picture you see below is the location to which the company was moved in 1957. We are still in that building. It doesn't look anything like that now; those cars you see in front of it are not our cars today. But, anyway, it's still where we are set, quite a bit larger and with a couple more buildings than before, next slide. Henry, please. So we started in the '60s to expand the company, both in offering and also geographically, we moved into Indiana and opened our branches in Evansville and Indianapolis. We also moved a bit eastward of Louisville and Kentucky to Corbin, Kentucky. The rigid frame haulers, Euclid trucks, came on board. And we also were one of the first Drilltech drill blast hole dealers, which is now a Sandvik product. Next slide, please. So as we move into the 80s and I was going through the history, I started trying to identify which period of time was the most impactful. And really, you could argue as we go through this that they all significantly impacted where we stand today and who we are today. But, in the 80s, it represented our largest expansion. We moved into Pennsylvania. We moved into West Virginia. We opened up our Saint Louis branch and our Fort Wayne branch as well. We also became a Hitachi Construction Equipment dealer at this time. I took on the lines of Link-Belt and Tamarack drills, which would later become Sandvik products. So, we're in a growth mode, and it was a good period of time for Rudd, and it did position ourselves for, quite honestly, where we are today. Henry. So as we move to the end of the 90s and into the 2000s, and we look at who we are presently. An important move for Rudd. If you look at our geography that we cover, there was a hole in the middle of it. If you look at Ohio, we were west of it. South of it and east of it. But you had to get through from one side of the territory to the other. We really had to go through Ohio. So, we moved into Ohio and opened up our Columbus branch and our Cincinnati branch. And then we moved into Cleveland as well and opened that branch. So, that represents a large part of our market for the equipment company. It was a perfect fit for us as well. And we also added Bergman Haulers, which is a small, two-axle articulated hauler ranging from five tons to 15 tons. Um, and then probably the most important thing and why we're here talking today is the acquisition by Nordic of Rudd at the end of last year. Next slide. So, as I mentioned, our footprint, you can see in this slide that we filled that gap where Ohio is; the shaded part represents seven states. We do have a small portion of Tennessee and Maryland as well in all of our territory. We are the exclusive dealer for Volvo Construction Equipment and Sandvik as well. We're also exclusive dealers for Hitachi and Link-Belt everywhere except the Ohio territories. Um, a big advantage that we have. Speaking of the footprint that we cover, we have a lot of customers who move from one state to another doing work, and they are somewhat transient. And, they have the ability to get consistent service from. Right Equipment Company where, if they're looking to other dealers for other manufacturers, they have to go from one dealer to another dealer to another dealer throughout our territory. So that consistency is a value to them as well, what it provides for us is being able to move our technicians. You've heard a couple of times about one of the challenges we face everywhere, which is finding good, qualified technicians. Well, with our footprint, we can move all of our technicians on a temporary basis to take care of needs in other places in the company. But we also have specialized technicians that we can move throughout the company as well, who have different capabilities than some others. So, there are some big advantages that this gives us over our competitors. Next slide, please. If you look at the customers that we cover throughout the company, you know, there are some major segments of the customer base, primarily, you can look at all the branches in the construction industry, the waste, particularly landfill transfer stations, which are prominent across the territory. Stone aggregate producers as well. And we're in the forestry segment, too, particularly the sawmills. You'll see a lot of Volvo wheel loaders within the sawmills across our territory. In addition to these, there are pockets of mining within Rudd's area of responsibility. Next slide, please. And also, there is some presence of demolition that's primarily within the larger metropolitan areas, but there are demolition activities elsewhere. There's also a pretty good scrap industry. As a general rule, it typically follows the rivers that flow. But you can see scrap yards in various places throughout Rudd's area of responsibility. Next slide, please. Henry mentioned some of the large and infrastructure projects, and some of the conditions you can see here that we have quite a bit of large projects ongoing within Rudd's geography. Just to mention a few, right here in Louisville, across the river in Indiana, we are servicing a mega data center out of this branch. We have a customer who is handling most of the dirt and site work out of the Columbus branch. It's their working. And again, I mentioned the consistent service that they see, even though they're used to dealing with this out of Columbus, they're here seeing the same level of commitment to service out of the Louisville branch as well. Just a little south of Louisville, there's a blue oval EV battery plant. The total investments are approaching $6 billion. Uh, big site there as well. Go into West Virginia and we have a customer, Nucor, that is constructing a sheet steel mill. We already do a lot of business with Nucor. We sell them a lot of Volvo products. This is about a $3 billion investment, and it's approximately a 45-minute ride in a service truck from this new facility to our branch in West Virginia as well. Also, there's another large project that's getting ready to kick off in the Cincinnati area, which is the Brent Spence Bridge. It's part of the infrastructure investment that Hendrix spoke of. Right now, they're estimating that the project will approach $4 billion. We have customers in that area who are perfectly set up to supply stone for the project and other subcontractors as well. So, we've got those large projects within our area that we cover. But if you go back historically and look at the consistent contribution from smaller contractors and the relationships we've established with them, it drives us as well. While we welcome these large projects, there's still the consistency of the normal small contractor, which is part of our business that we embrace. And we've built our foundation on that as well. To give you an example of what I'm talking about. A couple of weeks ago, I made a trip from Pennsylvania, through Maryland, and down through West Virginia, traveling through those states for about a five-hour drive. There were 11 highway and bridge construction projects underway. And of those 11 projects that we drove through in those five hours, customers that we are doing a lot of business with and have done a lot of business with for a long time were the prime contractors on ten of those 11 projects. So, you know, that's just the consistent business that we strive through our service and through our efforts and through our relationships to continue to drive them back to us. Next slide, please. Henry, something that we've talked about, and Laura and Henrik have also addressed. Drives, what I believe, makes us special. Everything starts with our people. If you look at all the different items listed from the training centers to the sales, to the in-house customer support center that we have, to our machinery build, it all takes people. Over 32 years ago, when I came from a competitor to work for a company, the first thing that impressed me as a young man was the people that Rod has. That's something we built the business on. That's something that is in our culture. We have a can-do attitude. People just continue to chip in and do their part; they understand our business and that the customers drive our business and it's our people that make us special. We have all of these things that make up the company that we do differently than others, but it's the people that drive these businesses and these portions of the road within us. Uh, Hendrick, next slide please. So we lead with service. As Lars mentioned, it is a fairly simple business. We sell a piece of equipment, and then we provide the support that adds additional value to the customer, keeps their machines running, and when they are ready to purchase their next piece of equipment, they come back to us. It's as simple as that. The reputation of Rudd Equipment Company is one of support, service, taking care of our customers, and promoting uptime for our customers. And that's known through our manufacturers. Volvo routinely uses us as an example of our capabilities to support our customers. And we lead with service. Our other manufacturers do as well. That is what we're known for. It's our reputation. So, next slide please. So, training is the beginning. This is what it takes to drive our service business. One of the hardest things right now for us to do, as I mentioned earlier, is to go out and try to find technicians to come to work for us. And that's difficult pretty much everywhere. We made the decision years ago that if we brought people into the company, we would train them on how we approach the customer. We provide them with continuous training, which works better for us. We have two training centers, the one here in Louisville. We also have one in Cleveland. The classes that we offer typically have a maximum of 12 participants. So, it's small classes. If it's 8 to 10 participants, we're fine with that. But we don't want to go over 12 people because we don't feel that we can properly train our people with any more than that. We cannot properly train our people with any more than that. Their week-long courses are customized and designed by our trainers, all of whom were in a service truck, so they have a great feel for what these technicians face every day. And they design the curriculum around real worksite scenarios and try to address the immediate needs of those customers. In Houston, our training centers also serve as our technical call center. So, we bring in calls from all the different branches. If there's an issue that might be a little bit delayed in finding a solution, we keep that data in-house and use it across the company if we encounter those same scenarios again. Our training centers use a train-the-trainer program, which means our manufacturers will train one of our trainers. And so then they're able to use that same training and certification to go back and train our technicians. And so therefore everything we do is certified by the manufacturers. As we train. Uh, next slide please. So our apprentice program is where it starts. As we bring in technicians who are new to the company, they start as entry-level technicians. This is a program. We start them in. It's a two-year program. There's a good mixture of classroom as well as field time. They spend, uh, no less than two weeks per month in a classroom setting, uh, being trained. And these sessions are conducted both in Louisville and in Cleveland. And they're also, as they return to their branches, they're monitored by the training department to see what they're working on to make sure that they are getting it on the field. We use our master technicians at the branches as aides and mentors for these entry-level technicians. The idea is to get them, over a two-year period, from understanding the fundamentals of what it takes to be a technician to mastering advanced diagnostics as well. An interesting comment was made by one of the apprentices in the class that will graduate in December. Having a discussion with him about the value of returning to the branch and learning in the classroom as well. The branch he works at has a significant number of master technicians, but he said that he tends to learn more from one of the newer, younger technicians who has been with us for six years but has been in a service truck for three years. And when asked further about it, he said that the master technicians. The mentorship is great, but sometimes they're able to identify problems quickly and skip some steps to get to a resolution, whereas the younger technicians go step by step by step. So it helps him learn better to go through the proper steps of diagnosis as he works his way towards the master technician. Quicker diagnostics involve recognizing an issue and solving the problem. Uh, next slide please. Speaking of our Master Technician program, it is something we are very proud of. In fact, we just had our master technician testing last week here in Louisville. And, to be qualified at the master tech certified level is indeed a challenge. So, they start out at a certain level, whatever they test into, and then they progress throughout, whether it's as a shop or field mechanic. Levels one, two, three, four, up to a master tech level. Again, they have to be nominated, and once they're nominated, they must be approved to enter the program and test as a master tech. Part of the criteria for entering the master tech testing is that they must be able to diagnose and repair quickly. But we also assess their attitudes and how they approach the customers. We look at their organizational skills, we look at how they work through processes to achieve an end result and solution. We go as far as to look at their service trucks and assess how organized and clean they are. So, they enter the program and come to Louisville, where there is a week-long learning and testing period that culminates with a day of testing. And what that encompasses is there are stations where the training department has bugged certain machines, presenting difficult problems that they have to diagnose and solve. There's a judge at each station. They measure the time it takes to solve the problem. But they also look at the method, the steps that they took to get to the resolution of the problem. These technicians leave their branch and come to Louisville to do this. And there's a lot of stress associated with it. And as you walk back and you watch them studying and preparing for the test, you can sense the stress, but you have to understand that they have left their branch. Everyone at their branch, where they work full-time, knows that they are testing to achieve master technician status. And, if they don't pass, then they have to go back to that branch. Now, they can enter the program again and test again, but it takes them a year to get back into the program. It's a great program. It's something, again, that sets us apart from our competitors. We're very proud of how we bring technicians in through our apprentice program and grow them through the master tech program. Especially today, with the difficulty of finding technicians. But it also allows them to grow within the culture of the equipment company. Next slide, please. Our rebuild program includes several branches that are certified by Volvo to rebuild Volvo equipment, but we don't only rebuild Volvo; we also rebuild other brands of equipment that we sell. Hitachi. We handle several Hitachi rigid frame trucks and excavators. Primarily, it is Volvo machines, wheel loaders, and articulated trucks. And two branches will handle most of our rebuilds. We have others that will handle any overflow if necessary. It's a customizable rebuild program. It starts with identifying a candidate. These are marketed and sold, usually by our sales representatives who market our parts and service capabilities. They also sell our rebuilds, but it begins with identification. Identification of a machine. That's a candidate. We then prepare an estimate for the customer. Sit down and show them the benefits and the value that is created by refreshing and creating essentially a new machine that gives them a second life of their initial investment. Work through the scope of work with the customer and agree to it. We bring the machine into one of the branches, and we start dismantling it. Once we get the machine torn down. We identify any additional issues beyond the scope of work initially presented to and agreed upon with the customer. When the customer visits, we physically show them what we've done with the machine and advise on any further actions needed. So, after that, we reassemble the machine, and the customer receives a finished product. There's testing done at the site, and then one of the technicians from the rebuilding branch will follow the unit to commission it as well. This is a program that we actually helped pilot with Volvo. Next slide, please. I think we have a quick time-lapse video here that we can show of the rebuild process. Okay, quick video. We don't typically move that fast, but we've got some really good technicians. Um, but that was a video of Volvo that put together, uh, parts availability. So, Henrik mentioned our central parts warehouse in Cincinnati, and we utilize this as all of our stock orders go into our central parts warehouse and then our branches will pull from that. It supplements and makes our parts availability off the shelf the next day. It's a huge competitive advantage for us. So we have our own internal freight system. To give you an example of what happens. A branch needs a part that's located in our central warehouse. They have a freight truck that will leave their branch that evening. Once all the orders come in, they exchange parts with all of our branches and head back to their branch. And it is there early in the morning. Usually by 5 or 6 a.m. Our parts departments can unload the parts, load them onto the service trucks, or have them ready for customer pickup. A big advantage with us is our extensive footprint. Again, we cover that area. We also have a used parts department located at one of our branches. The primary function involves bringing in Volvo and Hitachi machines that have been decommissioned or are set to be decommissioned. We part out those machines, clean the parts, and then place them on the shelf. And, a different solution for the customer that might have a different need. And financially, through used parts, they can purchase what they need. We do have a dedicated Salesforce, which I spoke about earlier, to market and sell our parts. They're trained and they're experts. And we are seen by our customers as solutions providers. Next slide, please. Enter componentry. We have the capabilities to rebuild many of the components, most of the components that are on the machines we offer. We can do this in various ways depending on the customer's needs, if they have a component and the time. There are a couple of different options where we can bring their component in and perform a repair and return. On their component, we can offer a full rebuild of this machine. We can also offer exchange components in stock, where we've taken a core and rebuilt it. The customer brings their core in and takes the component we have on the shelf. It's a quick turnaround. And then we rebuild their core to put it back on the shelf for the next customer that comes along. We also have a machine shop located at our Cincinnati branch. We have full machining capabilities there, allowing us to do multiple things, but we also have the ability to reverse engineer and produce parts that are hard to find or no longer available. Next slide, please. Henrik, so we move forward to today. What growth opportunities exist, and where do we see immediate potential for expansion? You can see the three areas that we've highlighted here: market share, rental fleet efficiencies, and parts and service growth. Next slide Henry. So market share, essentially what this does for us as we get more machines out into the field. And when we get more machines out in the field, eventually the circle of life for the machine is that we start selling parts and providing service for these machines. The biggest opportunity here to increase market share and gain traction with machines is through excavators, across the board from our geography. Excavators represent 50% or in some years even more, of the total machines that are sold within our regions, and the way to increase this share is through rentals. Next slide please, Henry. Rentals for excavators are particularly our primary growth area. That's how excavators go to market. That's how they're sold, through the rentals. We can make our rentals more efficient through a number of ways. But the one thing that it provides for our customers is a quick turnaround. If they have a quick job and the flexibility for when they take it out or how long they're going to need it, the customers are willing to pay for this flexibility and quick turnaround as well. What it does for us is, first and foremost, we maintain high utilization of our rental fleet. But also, if a customer happens to take a machine out early in the year, whether that be February, March, or April, and they have a short term job and then they have another short term job, then it turns into a longer job before you know it, they've had this machine all of the construction season, and they're able to take advantage of some of the rent that they've invested in this machine and turn it into a sale and convert it to a sale if they happen to send it back. It also provides us with a machine that's ready to be sold to other customers. So, in terms of efficiencies, how we can better handle these rentals, we need to quickly identify machines that have low utilization and move them out of our fleet. And we also need to make sure that we build on those models or those particular machines that have high utilization. We also need to tailor our rentals to become more flexible to stay on rent. The ways we do that fall under the terms of our rentals. We have a set of parameters outlining how we rent equipment. The flexibility to fit the customer's needs is a way to create more utilization of our rental fleet. Also, if we consider investing in attachments that are necessary, particularly for excavators, to make them more versatile machines, it enhances our ability to keep these machines out on rent for the entire construction season. So next slide please. So that leads us to the service and parts sales. So everything that we are really focused on, we want to sell the machines. We want to get machines out, increase our population, and have more machines out on the market. Be aware of where the machines are and take advantage of these populations that we've created through increased market share and increased sales. At the end, we need to be proactive and ensure that the customer knows when they have an issue, we are the ones to call to provide a solution and get those machines back up and running. And this will promote growth for our parts and service revenue. We will continue to be aware of our population, continue to build our population, and continue to train and build our sales force as well. So with that, Henrik, back to you to talk a little bit about the business development side.
Thank you, Vik. So, I wanted to talk a little bit about the projects that we have been working on since the takeover. Starting with automatic lead generation. I will talk more about that on the next slide. Other digital tools. This could include anything from barcode scanners to make our parts management more efficient, to looking at digital solutions for field technicians to prepare their time reports and work orders. We are also working on developing the CRM system and making improvements to the road network. I will talk about that. We are looking at additional services and products that we could add to the network, more in depth. And we are evaluating further US expansion. The automatically generated. I think those of you who have followed us throughout the year are familiar with this. It's a way to use AI to make our sales more efficient, particularly in service and parts sales, but also in new equipment sales. The way this works is that, first of all, all the machines, through their telematics systems, provide an enormous amount of data. Now, we also possess large amounts of data through our service history. So we are in a good position to know when something is about to break down, depending on the signals that the machines are sending. The amount of data created by the machines is so immense that there's no way for a human being to work with this on a manual basis. So, we need to optimize this. So what we do is essentially connect every machine in the field with a specific customer, and that customer is linked to a sales representative, whether it's for parts and service sales or for new equipment. And then based on our service history, we create rules so that when a certain signal is generated by the machine, or a series of signals occur within a specific time frame, it immediately or automatically triggers a sales lead. This lead goes through the CRM system to the mobile phone of the sales rep, who is then prompted to contact the customer and make a specific offer. This is something we worked with and used in real life in our previous business in Russia, and that we are now bringing to our new business in the US. A very important part of this is then to ensure that we follow up, that the sales reps actually do what they are prompted to do by the system, and also to analyze whether we are generating a lot of leads that don't result in sales because then we need to go back, change the algorithms so that these leads no longer appear. Um, so we are now in a phase where we are cleaning up databases, and we are about to start creating the rules. But this is something we are looking at launching within a relatively short period of time. It really depends on how long each step takes. But we are working actively on this and for the future. This is also something where it will be very interesting to see how we can enhance this even further when we use AI and so on to make the rules even more efficient, or to analyze leads to find out how they can be more effective. Looking at the road network, there are some improvements that need to be done to reach our growth objectives. We need to be closer to certain customers to gain this market share in excavators and to capture the full potential of the service and parts business. We have two existing locations that I think need upgrading. Um, but there is also an opportunity to add smaller satellite branches in large market areas. On this map, you have a few locations that we think are potential locations for satellite branches in order to increase market share and get higher penetration of service and parts sales. I don't believe that these investments will be significant. They are more within the framework of maintenance CapEx. So looking at further expansion opportunities, I think our main focus now is really to grow organically within the existing business and existing customers. Vic talked about the opportunity to gain market share for certain products, particularly excavators, and to grow the service and parts business. We are looking at possibilities to add additional brands to the network to increase the business as a second focus. And thirdly, we are continuously analyzing and looking at opportunities to grow further in the United States through acquisitions. Right. I'm ready with my part now. Uh.
I think we have a.
Short time for some Q&A. Okay. So, I would then proceed.
Uh, we're.
Largely on time. Maybe first give the chance to the floor. I have a few questions online, specifically about the US business. And while we have Vic with us from the US, first I ask if there are any questions from the audience. I have one here.
Yes, hello, Adrian Gilani here at ABG. Uh, just first of all, has Rudd Equipment Company's strategy changed materially since it became part of Ferronordic. I mean, did you run things differently before, or are you doing more or less the same thing now as before the acquisition?
Vic, I'll leave that to you. Uh.
Primarily, we're running things the same as we did before. There are some enhancements that I spoke about in the presentation that we're actively exploring for growth. For example, the excavator growth in terms of market share, and also the growth in parts and service populations. As Henrik Carlborg discussed, regarding the lead generator. Uh, those are things that are going to enhance and build on what we're already doing. But largely, we're functioning as we always have as a company. We feel that we do things pretty well. We can always do things better. But, uh, there have been some things that I just mentioned that Ferronordic has brought to the table to help enhance what we're already doing.
Okay, I understand. And a second question from me, with all the types of training and apprentice programs you talked about. Presumably, those exist because there is an underlying issue with finding technicians. Can you discuss how significant this issue is and whether it represents a bottleneck for growth for you?
Um.
I don't want to understate that it is difficult at times to find technicians, but the apprentice program and how we develop technicians is as much about developing the way that they would fit into Rudd. So, we can still find technicians as well. Through the apprentice program, we generate a group of technicians organically every year that we can employ in our services. And I don't think it's a bottleneck to growth if we handle it properly.
Okay. Understood. That's all for me. So, thank you.
Uh, Rutger Smith, I wonder what the market share for excavators is, and why is it low? And what could and should it be?
To start with, I don't think we will say what the market share is or what the exact aim is, but Vik, you can talk about the history.
So, uh.
I think it's been more a past focus, uh, of where we were looking and the direction we were going as a company, uh, in terms of how we handle our business, the excavators are more of a rental tool. And it has not been an area historically focused on by Rudd Equipment Company in terms of a rental fleet. So, that's something we've looked at in the last four to six years to start gradually growing and participating more in the rental market, which in turn will grow our share in excavators.
Can you talk about your exclusive brands, Volvo CE and Sandvik Drills, if I remember correctly? And is that guaranteed by a certain amount of time, or is it a period when you determine how that exclusivity works?
Well, that is based on the dealer contracts we have with these brands. It is stated that we are the only dealer in our designated territories, meaning that other dealers are not allowed to sell there, nor are our supplier partners allowed to sell directly in those territories.
My question is more about how long that guarantee lasts for?
Well, until they would be terminated or something would happen. I mean, these contracts are lasting indefinitely; they don’t have an end period.
And can you also clarify the kind of market share development for road for the last, let's say, 6 to 8 years? Overall.
Vic, in general, market share wise.
In.
General. Yeah, if you look at our product line, we've grown in certain areas within the Volvo line; Link-Belt cranes continue to grow. Our market presence there continues to grow, as well as with Sandvik drills. Both of those have primarily grown through the rental market. Uh, something that we didn't necessarily enter into in the past in a big way was looking to rent those products. But we found the need for it, and we entered into it, and it has really helped our growth with those products.
Maybe we can take one more question, then we'll leave the rest of the questions to the Q&A session at the end.
All right. Uh, just, a quick question. Uh, maybe more for Vic. So you mentioned the Anders from Nordica, by the way. Sorry. Um, so you mentioned the consistency and contribution from the smaller businesses historically being the bread and butter, if I interpreted that correctly. But now, of course, we're seeing an influx of larger projects. I mean, how should we think of that in terms of pricing and your ability to maintain healthy margins going forward? So just anything there would be helpful.
So I.
Don't want to.
Uh.
We shouldn’t marginalize these large projects; however, a significant number of contractors and our customer base are participating in these large projects. That's been a course of business for a while. There tends to be more and more of them now. So I don't think the mix of our customer base, nor necessarily the margin, is going to be affected. I think what it presents for us is increased opportunities. And, as Henrik spoke about earlier, reasons for the market to grow. So the mix of the customer base and our sales should remain constant. We're already dealing with many of these customers. There just seems to be more and more of these projects coming out, which will enhance opportunities for us.
Then, thank you very much. I think here we break for ten minutes. Uh, and I would ask everyone to be back in their seats at 35 minutes past the hour. That means that we're five minutes behind schedule, which I think is okay. When we resume after the break, we will start with Lars and Koen will join us online from Germany. So we will then look at the German business segment. So thank you very much. Let's all break for about ten minutes and be back by 35 minutes past. Thank you.
I should do this as well, but let's keep that. Um, why Germany? Why on earth would a dealer enter the most competitive market in the world, where two of the biggest truck manufacturers are based, especially when you're selling Volvo and Renault? Um, so why did we do that? First of all, we wanted to expand geographically, as we discussed. At that time, we had a very strong fundamental base of positive cash flow and a fantastic profit coming from a major country in the East, which helped a lot. So when Volvo asked us, do you want to go into Germany and become a large, probably the largest dealer? We were hesitating a lot. We looked into it and saw significant opportunities to do so. Germany is the economic powerhouse of Europe. It's the largest truck market in Europe. If you're anywhere in Europe and you need to transport something from one part of Europe to the other, you must go through Germany. That's how it works. We saw that Volvo had the intention to improve and consolidate the German dealer network. And we want to be a part of it. It was a clear turnaround opportunity. The business that we acquired from Volvo had been unprofitable for 20 years. So we knew that it was going to be tough. But we saw an opportunity to gain market share. We saw an opportunity to achieve better synergies between truck sales and aftermarket services. We saw an opportunity to make a difference and use the knowledge that we had from Russia, where we were the biggest independent truck dealer. And we wanted to expand our truck business and get a foothold in Europe. So that's why we did it. We executed that plan in late 2019 and throughout 2020, purchasing from the Volvo Group the assets related to sales and service operations for Volvo and Renault Trucks, covering approximately 30% of the German market. At the same time, we also acquired an independent dealer outside the house who was responsible for another 5% of the market. So, at that point, we had 200 employees and 11 workshops. Now, the strategy was to expand and improve the dealer network in our sales area. Okay. Meaning that we saw an opportunity to take full control of the service and parts sales in the sales area that we have. So, at the time, there were a lot of independent workshops operating only in the aftermarket. Whereas the Volvo part of it involved selling the trucks and providing service. But these guys, they only did service. We saw a possibility to gain control of the service and parts sales in our area. And again, as you all know, it's in the service and parts business that our industry makes the money. I mean, particularly in the truck business, we also saw that by doing so, by increasing efficiency in the organization, by enhancing the network, and ensuring more stringent delivery to customers in the area, we would grow the market share and population. And obviously, we did this in collaboration with the plans we had with our partner Volvo. So what are the results? Since then, we have acquired another five authorized rental workshops in addition to those I mentioned. We have opened four new workshops. The existing workshops have been renovated and upgraded, including a greenfield flagship facility in Hanover, which you are all very welcome to visit whenever it is beautiful. Um, we have a service in parts sales, which is up 6% from 2020 to 2023. Our ambition on market share was partly impacted, of course, by supply constraints following Covid. Covid unfortunately reached Germany six weeks after we took over the operations there. That obviously halted many of the measures and actions that we wanted to undertake, but that was the situation. And clearly and importantly, reorganizations and personnel changes were implemented to boost the efficiency of the operations. A lot of challenges. The strategy took longer to implement than we had expected. It was complex to acquire and integrate these new businesses that I talked about, with different cultures, systems, and processes. Um, COVID, as I mentioned. Um, it disrupted the supply chain. And not only that, but the most important thing, I think, was that it slowed communication and changes. It's difficult to implement a new company culture on Skype or Teams. It is. And then came another thing which hurt us a lot. We had to exit the Russian market earlier than 2022. And that took enormous amounts of attention from top management, almost around the clock for a year. We're trying to get out of there in a decent way. Unfortunately, we also faced German administrative hurdles and very rigid organizational structures. It is hard to restructure and reorganize efficiently. All right, it's Germany. What takes an afternoon in Russia takes roughly half a year to change in Germany. That's what it is. And again, it's hard to attract new technicians. We talked about it in Germany. We also concur. We'll discuss it. We also have an apprenticeship program that we are developing, and the state is also a part of this initiative. But it is hard to attract new technicians. So, we ran into a lot of challenges, and things have not turned out the way we wanted them to. Clearly, there's no question about it. It has taken longer than we expected. We knew it was going to be hard, but not as long as we expected. However, we have increased total sales by 132% from 2020 to 2023. Service and parts sales total has been relatively stable at 27%. Obviously, the higher that share, the healthier the gross profit. Obviously, there is a limit to it because you also need to sell trucks in order to have something to service in the years to come. So there is always a balance there. The organization we had was performing well, as you can see from the revenue side, where we were experiencing consistent growth. We expanded the organization. We trained the organization, we changed the organization. We expanded SG&A by 120% in absolute terms. However, it declined as a percentage of revenue and was poised for further growth. The market stalled in 2023, and we ended up with higher-than-expected costs for the market that existed. So, we had to embark upon an efficiency program, which we did. We launched it in 2023 and, beginning in Q4, aimed to make the German business more efficient and resilient. Coming back to what we talked about, the service and parts absorption rate of plus one, that's the aim we are targeting, and the program then involves a reduction in both horizontal and vertical administrative units. We reduced the number of regions. We made the organization flatter. We removed a number of middle management roles. And we analyzed our cost structure across all functional and general areas without hurting the possibility to sell more hours in the workshop. So, to do all this with minimal impact, both on the service side and on the truck sales side. So we depict here roughly where we take in the costs. And as you can see, by far the largest categories are general and administrative costs. We are now confident that we have achieved the level of 60 million Swedish kronor per year in savings on a rolling, annual cost basis by late Q2 2024. So where are we today then? In Germany, we have 20 service locations throughout most of central and eastern Germany. We have a sales area that covers approximately 18% of the German market for heavy trucks. The expansion of our service network and integration is mainly completed. I'm not saying it's fully completed, which it never will be, but it's mainly completed. There might be some spots here and there where we might need to add changes, but we now have a good network in Germany. It’s taken a long time to integrate and make it one team. We have a functioning network now. We have professional teams for service, sales, and support. We have a service organization that is well positioned for growth, and we see a potential for a substantial increase in market share. and population growth. Again, population growth and the correct rate of population growth are important for our ability to maintain a profitable business. In terms of making money in the aftermarket, you need the right population. And I will come back to what that is. We now have a more resilient platform than we used to have. So what are then the opportunities ahead that we see? First of all, the initial plan that we had still stands. But a lot of work still remains to make it happen. And what we need to do again is create a bigger and long-term profitable truck population by growing market share. So we need to grow the market share, but we also need to make sure that we increase the share of rigid trucks in our sales. And what is a rigid truck compared to a truck tractor? A truck tractor is a tractor that drives on the highway with a semi-trailer. It's a four by two with two wheel bases, and a semi-trailer runs very efficiently on the highway, either inside Germany or from Germany to various locations across Europe. It's in the territory for three to three and a half years. And then we tell the customer, now it's time to sell it because it's time for you to make more money to invest in a new one. So we will buy the old one back, and that's the circle it goes. That's good. We need those trucks. But a rigid truck, for instance, would be a tipper. A truck would be a garbage truck. It would be trucks that are staying longer in our population with more axles, and that are simply better trucks for our service and parts business, and they stay longer in our population. And obviously, the longer a truck stays in our population, the more parts and service per year it will require to maintain the same productivity. Traditionally, we have not been strong, to put it mildly, in selling rigid trucks anywhere in Germany. And this is clearly a very good sign that we've seen in the last quarters; while our total market share has dropped, our sales of rigid trucks have not. In fact, we are strengthening our positions in this very important segment to create a profitable aftermarket. It's the same as selling, you know. Articles for Volvo cars. I mean, they are used 24 hours a day and always need to run; they must be serviced properly to yield the profit that the customer creates, wants, deserves, and demands. So this is, again, to grow the parts and service sales to increase productivity. And one very, very important part of the German expansion plan is leadership in electric trucks and sustainable transport. So we'll talk a little more about that. Now, this is the biggest truck market in Europe. And, 55% of the market consists of tractors. That's our strength. We are strong. We are relatively strong in selling tractors. 45% of the market, or half of it, comprises ready trucks where we have opportunities to grow. In 2024, we're only expecting 2% of the total truck market to be electric. Now, we expect this to grow significantly in the coming years. And one other thing with the truck market in Europe, there is no seasonality, and registrations are evenly distributed throughout the year. So as you can see, this column on heavy truck registrations, the line is the average truck total mileage index. It means how many kilometers they are driving on the autobahn per year as an index. Back to, if I'm not mistaken, 2008. Yes, 2008. And it follows, roughly more or less. And as you can see, there is no question about it. It's dropping LTM by 15-20%. And that's what we are experiencing and have experienced based on the numbers we've seen in the last quarter. We are probably quite early into that cycle, earlier than others. So, that's what it is. It's still a very strong market over the last 12 months. But it's, as we said at the beginning of the year, it's likely to not be that strong come the end of the year. Uh, and you've seen our numbers. So, there's no secret there. But it's fairly stable. It will come back. The shift to electric is something which is talked about a lot nowadays. I mean, it has been talked about a lot for many years, but now it has another dimension, maybe a different twist on it. Um, but the EU law is still in place. You know, manufacturers must cut CO2 emissions by 45% by 2030 for new trucks sold in the EU, compared to 2019 levels. So, we assume quite conservatively, I think, that 20% of all trucks in Germany by 2028 will be electric. Undoubtedly, Volvo and Renault Trucks are market leaders and first movers in electric trucks. The amount of investments that have been made, and the market positions that Renault Trucks have secured, will undoubtedly assist in growing our overall market share. McKinsey says that prices for electric trucks will be lower than today, but still 50% higher than today's conventional trucks, which logically would mean that revenue will grow significantly when we sell more electric trucks. And what we see from subscription data, which is something that I find interesting, is that repair and maintenance costs for trucks are similar to or higher than those for conventional trucks, so the potential for service and parts sales should remain fairly stable. There's a lot of information, and many things happening around this, but this is what we observe. Cohen will talk more about that in a few seconds. But what we are also seeing is a clear move towards electrification. We've previously discussed this in the context of equipment-as-a-service. We see other models of ownership, we see other subscription methods, etc., coming into play here. The assumption is that the transition will generate multiple new opportunities. We have already started. We have an electric rental fleet, and we are well situated to capture new opportunities. On December 21st, we placed our first order for 3,432 fully electric medium trucks from Volvo and Renault. In the meantime, it takes some time, to be honest, and a lot of work. We were awarded €23 million in government subsidies to promote the electric transition. Um, and we want to develop the rental business, uh, to help customers in the transition to battery electric vehicles, to position ourselves as experts in sustainable transport solutions. And we want to go as far as to develop in-house sustainable transport services capabilities ourselves. If you remember, we did that by using contracting services when we said, okay, let's do it ourselves in order to not only sell a service and take an extra slice of the value chain going upwards, but also to learn a lot. What is it like to be a customer operating these machines, or in this case, electric trucks. Now, our rental fleet is expected to reach 100 trucks by the end of this year. So, are we growing that? Of course not. And as you all know, the electrification has not taken off as was planned, discussed, hoped for. Uh, but it's coming. So what is the sustainable transport solution? What we see in the market is that the customers of our customers increasingly want and need to procure zero-emission transport solutions to reduce their footprint. But our customers don't want to take that step to buy electric trucks, because it's a big shift. It's a big, new thing. And we potentially see the potential for lower TCO. Total cost of ownership of the truck implies high profitability. Certain customers are even prepared to pay higher rates for those that actually run electric trucks. But customers have many reasons for their reluctance. Citing infrastructure, charging infrastructure, and new technology challenges, among others. So, we see an opportunity here to fill the gap by providing sustainable transport services to transport buyers and use the experience we have gained in other markets, from contracted services to actually becoming a leading service provider. I'm not claiming we'll be the biggest, but certainly a leading, impactful force, and then use that expertise to enhance our efforts in selling and promoting electric trucks in general. And we have a pilot project that we expect to start in the second half of 2024. So that's something we're working on. And we believe this is a bumpy road. It's not going the way everyone expected. But we want to be in the forefront. And we want to drive this development as much as we can. Uh, and so far, so good, I must say. So that's about it. And now I want to hand over to Koen. Are you with us?
Yeah, me.
It's very good. Thank you. Cohen is our aftermarket director for Germany. We'll talk a little more about the very important service and business in Germany. Thank you.
Okay, thank you, Lars. Let's start then, please, with the first slide. Right, what we aim for is to deliver productivity to our customers. And with that, we actually aim for a win-win situation. So our business model in aftermarket is such that we advise our customers about the timing of a service, and of course, the type of service we provide is of the best possible quality. And as such, we secure maximum uptime of the truck and a longer life of the truck. It's a clear win for the customers. And it's also a clear win for us because by doing so, we secure a steady inflow of pre-planned workshop orders. And that essentially summarizes how we plan to secure organic growth for the future. Whereas in the past, our growth in the aftermarket was a mixture of growth by acquisitions and organic growth. Now, the question is, of course, do we have potential to grow and, for that, please, the next slide. The answer is clear. Yes. Even with a non-growing population, which is obviously not as large a target as Lars explained. We want to grow our population. But even with the population that we have today, we have a clear potential to increase our sales because our potential is based on the current population of 8,520 Renault trucks. Uh, we only grasp too small a percentage of this potential. And our target is to capture 23% more of that potential that we currently have by 2026. So we have clear potential to increase sales. We have a clear target to increase sales in the aftermarket. The question is, do we have a plan or not? Do we know how to increase these sales? And the answer is yes. And that, I will show on the next slide. This organic growth will be based on two cornerstones. First is population. Know our population. Know our population. Identify each truck in the population and based on this knowledge, offer tailor-made solutions and offers to the customer. And the second cornerstone is dynamic pricing, smart pricing even. But let's first talk about population. So, next slide please. Yeah. So how do we plan to capture the maximum of our population. What we have done in the past three months is that we have identified each and every one of these 8500 trucks in our population. We know how old they are. We know how they are used and in which segment they are utilized. We know how often they come to the workshop or choose not to. Based on this extensive data, we are able to offer the best advice on when and how to service these trucks. We are also able to prepare tailor-made offers for each and every one of these trucks, and this toolbox of knowledge and recommendations we give to our aftermarket salesmen to go out to the customer and try to convince them to come to our workshops. So that's basically step number one. And how we capture our population, whatever offer we make. The first and best offer we always make is a service contract. Uh, and more about that on the next slide. What does the service contract mean? A customer pays a fixed monthly fee for three, four, or five years. And for that fee, for that monthly rate, he actually buys peace of mind. The only thing he has to do then is wait for our call. We call the customer to confirm the appointment. Your truck's services are due, or a preventive repair is due. And there is absolutely no reason for the customer to decline this invitation because the workshop visit will be for free. It's already covered by the monthly rate. So, by conducting these regular workshop visits, we of course ensure maximum uptime and prolonged longevity of the trucks. So it's a clear win for the customers and a clear win for us because we again secure it. A steady inflow of pre-planned workshop orders. So, it's very important that we sell as many service contracts as possible, together with the trucks. And, we are doing so by making this already attractive offer of a service contract even more enticing by offering some extra goodies specific to Ferronordic. We offer free replacement trucks when the customer's truck is in the workshop, or we provide a free pickup service for the customer's trucks. The second way to increase service contract penetration is by preparing very professional marketing material, focusing on the total cost of ownership of the service contract. With facts and figures, we prove that it financially makes sense for the customer to buy a service contract. Another tool to increase the capture of the population is connectivity. Here we have specialists in our workshops who receive signals coming from the trucks, early warning signals. Based on these signals, we contact the customer and advise them to come to the workshop for service or preventive repair. It's a less powerful tool than a service contract, because the customer, of course, has to pay for this phase. So, you have less guarantee that the customer will indeed come to the workshop. But anyway, it's a very powerful tool to contact customers and try to convince them to bring their vehicles to the workshops. So, all of this, knowing that service contracts and connectivity will increase the share of potential that we capture, and as such, the share of the market demand. And then the question arises: can we meet that demand? Do we have enough mechanics and do we have enough hours available to meet that demand? Please. The next slide. Our initial and continuing priority is to enhance the productivity of our mechanics. Now, what is productivity? What defines productivity of a mechanic? It's basically three factors. Availability determines whether the mechanic is in the workshop. Of course, he is not. Of course, he is not available when he's on holiday. You cannot really influence that. But what we will try to influence in a positive way with positive measures is the second strategy. We ensure a healthy and safe work environment. Environment. And also a pleasant work environment, a good atmosphere, team spirit, and soft issues like that. We were actively working on these things. The second factor is utilization. I have been talking a lot about pre-planned workshop orders. And why? Because that is the best way to avoid idle time. The less idle time, the higher the utilization of your mechanics. Last but not least, this efficiency, what we have done, involves our mechanics or technicians, as you might say, all having tablets these days. And in these tablets, they add or enter all the information on what type of work they have been doing on the truck. The information from the tablet automatically flows into our systems, which means that no information got lost, unlike in the past when everything was documented on paper. Papers got lost, or the text was unreadable, and not every minute that was worked, nor every job that was performed on a truck, was invoiced because the information got lost. This is now history, thanks to this paperless, digitalized way of working. So that's how we increase productivity to meet the increasing demand. The second cornerstone to increase our organic growth is dynamic pricing, smart pricing. So it's obvious that, um, some work is more complicated than others. And for that complicated work, you need highly skilled, highly trained technicians with specialized equipment. And that type of work cannot be done in unauthorized workshops. And obviously, you can charge a different rate for that type of work than for the simpler tasks that can be done by a trainee or in an unauthorized workshop. So, this dynamic, smart way of pricing will allow us to capture more work and more of the potential than if we simply implemented a flat price increase, for instance. So that's how we work with pricing to capture the maximum of our potential. Um, that brings us to the next slide. A word about, um, the electrification of our population. The key word here, at least for me, is uncertain. We don't really know when the majority of our population will be electric. We don't really know when that will happen. We also don't really know exactly what the effect of electric trucks is on our aftermarket potential, or if studies coming from the car industry suggesting a 40% lower parts consumption for electric trucks are applicable. Now, our own experience does not confirm this figure. On the contrary, in the last 12 months, 1% of our workshop visits were done by electric trucks. But this 1% represents 2.5% of our aftermarket sales, meaning that we have doubled or more than doubled parts and service consumption for electric trucks compared to traditional diesel trucks. But again, 1% is, of course, probably not statistically significant yet. And so, it's again the keyword: uncertain, but there are a number of things that we do know. And for that, please, the next slide. What we do know is that working on electric trucks is much more complicated and requires a different type of mechanic. The mechanic working on electric trucks is actually more of an electrician or even an IT consultant than the traditional mechanic. Um, and then, that means. This mechanic also requires special equipment provided by Volvo. In our case, he needs special and regular training, which is also provided for by Volvo. And that means enormous hurdles for non-authorized workshops to work on electric trucks. And that gives us a comfortable feeling that, I mean, probably the parts and service consumption potential per truck is lower, but we will capture close to 100% of this potential and that will more than compensate for this lower potential. On top of that, because it's such a specialty work done by a new type of mechanic—electricians or consultants—we, of course, find it justifiable to charge a higher rate for this type of work. And those two positive factors, higher rates capturing 100% of the potential, give me a comfortable feeling to say, yeah, I don't see electric trucks as a threat to our aftermarket business, quite the contrary. On this positive note, I would like to conclude my part of the presentation. Thank you.
Then we proceed to some quick Q&A on Germany. Uh, there's my spot. Um, we're again a little bit behind, but I suggest we take a few questions, as we did with the US and still allocate time for the Q&A at the end. So we get a chance to ask questions to Koen and to Laura. Of course, in the context of Germany. So I would again start with the audience. Any questions from the audience to start with, and I'll. Yes, uh, just to start off.
When you say you want to sell more rigid trucks because they provide good aftermarket revenues for you guys. What's the sales case for the customer to buy a rigid truck rather than trailer trucks.
No, it's not for the customer. I mean the cost. It’s a segment which is almost 50% of the market. So, it's the same customers. It's just that we haven't been very successful in competing in that segment before. So we just need to get in there and do our own work to take a share of that, a bigger share of that market than we have. And frankly speaking, I think that also comes down to having an agile sales team as we discussed. We need to reach new customers that we haven't talked to before, and not only the old ones who call us up wanting to replace trucks. That's what we're talking about. It's not about the customers at all. It's really our job inside the organization to fix that.
Okay, and then also, I know you never really provide the exact number on the absorption rate, but are you able to achieve a one times absorption rate with the current population in Germany by simply selling to or capturing the existing population? Or do you also need to grow the population?
Oops. Um, to be honest, I don't think I could not. Yes.
Yes.
Perfect. Thank you.
Any more questions from the audience? Oh, one more.
Sorry, pardon me if you've already mentioned this, but what is the average age of the fleet in Germany? Is there something you've communicated?
Um, again, before you answer it. Is it a tractor or a rigid you're talking about? Because it's completely different in terms of the average; the tractor would be two and a half years. The average rigid would be four to five. So it's a very different ball game. Roughly, these are approximate figures. But it's something like, you just go in.
Well, I could give you the age of every one of these 8500, but I think.
That's a very good question, because obviously. But we know what it is. But you need to segment the trucks, and then you analyze like we do. Right. Then you go in, and that's why we want rigids because they remain longer in the population. Of course, a truck tractor stays 3 or 4 years in Germany. Then it will stay somewhere else for a long, long time and maybe move to a third location thereafter. Right. But we want to service them in Germany.
Thank you. We'll send you that Excel sheet with every single truck. I'll take one question from online, and then we'll move on so we don't ignore the people who are online. Um, are you satisfied with your workshop footprint, or are you looking for more acquisitions/divestitures to optimize?
I think I answered that we have a good footprint. There might be some. So in general, we're fine. We have a good footprint. There might be opportunities to grow when we see the population that we can make money from on day one. But that's no more. No more strategic investments.
Thank you very much. I suggest then we move on. Uh, which is Mike.
Okay. Very good.
Um.
Thank you very much, Koen. So then I step in and I will speak about our financial performance and our recently released financial objectives. My esteemed colleagues have paved the way for me. They have presented the opportunities and potential that we see in our respective business areas. They've presented where we are today and where we can go in the future. I will start from the finish. So, I will start with our financial targets, and then I will go back to what our financial position looks like at this point. I will focus on some of the key items in our financial statements, including the income statement, balance sheet, and some discussions of the cash flows. I will then also discuss how these items may change as we implement our strategy. So starting with those financial objectives that we released yesterday, given the opportunities and potential that we see in our markets, we have set ourselves the ambitious target to double our revenue from 2024 in our current segments by 2029, on an organic basis. Let me unpack that a little bit. 2024 isn't finished yet. We're using six months from 2024, times two, as a base. Um, we could use LTM, but then we'd need to use pro forma ROE. So that's the base we're using. Um, our current markets or segments are our sales areas in the US, our sales area in Germany, and Kazakhstan. Um. So there are no acquisitions, no M&A activity included in these targets. But we do allow for network optimization and network improvements within our sales areas and in the directly adjacent areas to our sales areas. We also allow for adding new products and brands to our current infrastructure and our current sales platform. So that's how we define the revenue target; when it comes to operating margin, this is driven by the revenue streams that we see, the ones that we expect to propel this growth forward in the next five years. We believe that we can achieve an operating margin above 6% within the next five years. Speaking of net debt to EBITDA, we target an asset to sales ratio. They aim to be under three times net debt to EBITDA. We examine the gross growth we anticipate and the margin we generate, assessing the cash flows this will produce and, of course, the assets required to facilitate this growth. And this is a number that we think is appropriate for us: three times, over a business cycle. This means that during periods of economic weakness, we can deviate from this target in the context of a strategic opportunity, i.e. M&A activity. We can deviate temporarily, but this is what we should go back to regarding dividend policy. We set the aim for Ferronordic to pay at least 50% of net income if our net debt to EBITDA is less than one. If our net debt to EBITDA is more than one, we say at least 25%. This is, of course, subject to board discretion. The board should consider, from legal requirements to our investment opportunities and investment needs, when they set the level of dividends. The idea of the capital allocation policy is to support organic growth, support CapEx with high returns, and to support debt repayment. Um, so we're staying in line there and also to support dividends and, uh, M&A when the time is right for that and the opportunity is right. As I said, I will now start by reviewing where we are at the moment and where we are headed. So, I start from six months of this year. This is what it looked like in the first six months. And what do we see here? We see a US business that is doing very well, but as has been discussed, we believe it can do even better. We believe that there is a lot of upside potential over time in the US. We see a Germany that is, as Lars just pointed out, suffering from low sales in a weak market. We have taken actions. We have reduced costs. We have made the business, we believe, a lot more resilient, but without hurting our sales and aftermarket potential, but rather priming it. So we believe we're in a good place now to grow going forward and capture a recovery when that comes. Central Asia, i.e., Kazakhstan, is now a very small part of our business. Less than 4% in six months of this year. Still, we also see good potential for growth from where we are today. We're far away from where we believe we can be. We also see group costs that, for this current scale of our business, are too big. So we need to grow the business or become more efficient in managing those costs. And we believe that we can grow our revenue without increasing our fixed costs. Moving over to some of the specifics on our income statement. This slide shows the revenue distribution by business activity to your left. On your right, you have the revenue distribution. This is again a six-month period. By geography or region. The revenue distribution is important when we think about the business model, of course. But looking forward where we see the potential, it speaks to the growth potential. It speaks to the margin potential, importantly, and to some extent about the risks as well. 36% of our revenue in the past six months was generated from aftermarket business. This is, as we see it, stable and recurring business. So that is a less risky component of our sales. If we look geographically, more than 96% of our sales in the past six months are in developed markets. So we have moved from being what we once were, coming from emerging markets to really becoming a developed market company. As we look forward, there will be a shift to some extent when we set these targets, as I said, from the revenue opportunities that we see; for example, the electric truck market is developing in Germany, where there are significantly higher tickets. So you would see an increase in that revenue stream. When we look at that again, the distribution. Um, if we look at the geographical distribution, then, towards the horizon of our period, we would expect to see about 50% of revenue in the US and 40% in Germany. So Germany is catching up, partly driven by those higher tickets for the electrics, which become a bigger part of the revenue mix. Something about gross margins. There are two main factors that we can say drive gross margin in our business. On the one hand, we speak of revenue mix, and by revenue mix, we observe three different components. That's how we disclose it. We have, on the one hand, new and used equipment and truck sales. On another note, we have the aftermarket, or the service and parts sales. Other sales refer to, uh, mainly rental income. Other sales primarily refer to rental income. As Lawrence mentioned, the more aftermarket business you conduct, the higher your gross margin tends to be. So the mix between these quarters can drive margins. And of course, in the long term as well. Um, if we look at the second part, that is product mix, that would be within the new and used trucks and machinery revenue stream. So there, to simplify, the more complex the machines or trucks you sell, and the more specific they are, the larger the margin will be. And that can also cause shifts in gross profits. Between quarters, you will see the ranges here. So, showing the variations we've had since January 22nd on a quarterly basis within a certain segment. And that's driven a lot by these factors going forward. When we look again into the future, we see, as I mentioned, different shifts in the revenue stream and an increase in new truck sales in Germany, partly driven by electric vehicles. But we also see significant growth in our aftermarket, given the potential we see there. But in general, looking at gross profit as an effect of all these different factors that impact it, gross profit is not the biggest driver for Ebit improvement potential. Rather, that potential comes from scaling, as we see it. This is our fixed cost, if you will. Our SG&A, selling expenses are correlated with sales. It would include sales bonuses, sales commissions, etc., so there would be a component that correlates with sales there, but not really our functional departments, our administrative support units; these are fixed costs. And on these costs, we need to achieve better returns or make them more efficient. And that's what we believe we can do as we grow our revenue going forward. Again, looking at those revenue opportunities that we see. A look at the balance sheet, starting on the asset side, this is as of the 30th of June. So what it looked like at that point, you will have our workshops to the far left. Then you will have the rental fleet in the US. The big red piece there. And then in Germany. In Germany, both diesel and the nascent electric business. And then you will have some other PPE, fixtures, fittings, etc. Goodwill. And then we have the inventories. Um, these are our products, the machines and equipment that we expect to sell. And then, of course, trade and other receivables. Looking first at the short term, we have communicated in the first two quarters of this year that we still have too much stock in Germany and Kazakhstan. We are working very hard to return to normalized levels. So from that, we would expect to see a decline in the inventory line there. But looking more long term, higher revenue comes. Higher inventories. That said, one of our clear objectives is to reduce inventory days and receivable days. So even if it grows in absolute terms with increased revenue, we are really targeting to decrease the percentage that we hold. So, inventory and receivables as a percentage of revenue when it comes to the rental fleet? We heard from the US that this is a part of the sales and marketing strategy there to be able to offer a rental fleet. So that will be a component that remains on our balance sheet. That said, in the US as well, we will, of course, want to keep this rental as short and efficient as we can to turn the inventory that we have here, or, sorry, the rental fleet that we have in the US as well. Looking on the liability side of the balance sheet. That is, of course, very closely tied. That's how we fund the assets on the asset side of the balance sheet. In the short term, we are again looking to normalize the stock in Germany and Kazakhstan. That would lead to some reduction in bank loans and floor plan because this inventory has already moved out of payables. However, what we would expect to see over time from the strategic plan and the financial objectives that we mentioned is that trade and payables will grow with revenue, but again, not as a percentage of revenue, but in absolute terms as we increase sales there. The rental fleet, both the fleet for conversion in the US and the electric fleet in Germany, would be on the floor plan or bank loan side that we see in this liability section of the balance sheet. If we double click on our liability side to get a bit of detail on what the debt profile looks like, we see the following picture. We see effects that are clearly more near-term. We are predominantly floating, almost 80%. So in that sense, we stand to benefit from a rate cycle that is declining. We have about two thirds of our debt in US dollars, if we look at currencies. So that makes that rate cycle more relevant to us. And about one third in euros in terms of currency risks. All our US business has US dollar assets and US dollar liabilities. In Germany, all assets and liabilities are in euros. So in that sense, we don't have direct currency risk. You would see significant movements in our consolidated income statement, which stem from the fact that the parent company provides loans to subsidiary entities in euros to Germany and in dollars to the US. The parent company has currency exposure in that way, and you will see that below the EBIT line in our consolidated numbers. In terms of the maturity profile, you can see that to the right here. It's really the bank component, the revolving credit facility and the term loan that have maturity dates there; the floor plans in Germany and the US are lease lines, which means that maturity is really tied to the sale of the asset. They do start amortizing after six months at rates between 2 and 5%, and then that rate accelerates up to 12 months. But in essence, they're tied to the sale of the asset again. That leads us into our discussion on floor plans, which in turn leads into our cash flow cycle. I wanted to include this slide to give you a sense of how our cash flow cycle works. This would be a typical cycle where we place an order at the point of shipment. We have a number of payable days, which are interest-free. Um, how many days? It depends on the product and how long the delivery days are expected to be. Are there any expectations of stocking the specific products. There are a number of factors, but it is safe to say that payable days to Kazakhstan are very long due to the delivery and logistics required to get the product there. Uh, for tractor shipments in Germany, the schedules are quite tight and short. If we can sell the product within the interest-free payable days, great. We pay and settle the payables. If we do not, then the payable would transfer non-cash into a floorplan or through a cash transaction into debt financing. If on this graph here, we would look at the rental fleet in the US, you would see the rent receipts there. So in that case, the inventory, or the PPE in this instance, would go out to customers and yield rent until we pay it, when we settle our funding commitments for the products. I want to emphasize this, as I have on the balance sheet and in this presentation. Our objective is, of course, to tighten this as much as possible. We want to reduce inventory days and we want to reduce receivable days.
Um.
Quick look at CapEx, um, CapEx really dominated by rental, as you can see in the US, in the first six months of this year, almost exclusively rental. Germany, about two-thirds of CapEx is also related to our rental fleet, part of it diesel and a bigger part to again, the growing fleet of electric trucks that we rent out in Germany. Looking forward, in the US, that will remain an important component. Henrik mentioned that there are certain improvements we need to make, or complements to our network that we want to add. Uh, not something that we offer guidance for here for several reasons. What our expectations are, either we may lease properties, we may do some kind of greenfield, or we may expand on the ones we have. And we also don't know when the timing of this will be. But, workshop and real estate are components, as we can also see in Germany now, moving from strategy to financial performance. We try to connect the dots between the opportunities and potential we see, and how that may be reflected in our key metrics. So, as mentioned, we expect the US and Germany to contribute about 50% and 40%, respectively, of revenue. In the US, we see growth potential from increasing market share for select products, including excavators, compact equipment, and rigid haulers, but also from growing the aftermarket business related to the population that we grow in the US. In Germany, we expect growth in the electric market where we believe that we can have an important market share. And, as just presented by Cowan, we also see potential to grow our important aftermarket business. Beyond this, we see opportunities in both segments to improve our network, but also to expand our brand and product portfolio on our already existing sales platforms. EBIT margin will see changes again in revenue mix and product mix. But on balance, the major factor that will drive EBIT margin higher is the scale and scope as we grow our business without the corresponding increases in our fixed costs. So, really gaining operational leverage there, you can say, when it comes to net debt EBITDA, our aim is to reduce inventory days and receivable days, and increase capital turnover on our balance sheet. Uh, and then, of course, with the expectations we have for higher revenue and stronger margins, we also expect cash flows to improve, which would reduce the numerator. And then at the same time, we would expect to see higher EBITDA also to increase the denominator. And that would give us more room on the balance sheet and drive net debt EBITDA lower. Balance and factor would be, again, the rental investments we're making that would, to some extent, increase the net debt EBITDA leverage metric. Um, there we go. So, that brings us back to these targets that I presented at the beginning. So I'm not going to dwell on those. No. Now I want to give you an opportunity to ask questions about them later. I wanted to mention also some of the other metrics that we will look at very closely or that we do look at very closely. Absorption, which we've discussed, is the extent to which gross margin from the aftermarket business, being more stable and recurring, covers our fixed costs. And here, as we've said, we do expect growth in our aftermarket business both in the US and in Germany, but not a corresponding increase in our fixed costs. And that would raise our absorption ratio over time in terms of invested capital turnover, also something that we keep a solid eye on. How quickly can we turn our invested assets on our balance sheet? And here we are actively targeting a reduction in inventory days as well as receivable days. Beyond that, we're always looking at the optimization of our fixed assets. Could that mean that we would shift from owning to leasing properties? It could, if we believe that it is optimal and strategic for us, and beneficial at the time when we analyze it? Growth in rental conversion, fleet, and electric vehicles is expected. That would work in the other way in terms of invested capital turnover ratio, which, in my view, is one of the most important measures. Um, important indicators or KPIs? Well, we do expect high revenue and margins while trying to increase the turnover of our capital. So, that should contribute to improving ROCE over the horizon. And we're also assessing every CapEx and investment for accretive ROI, and of course, examining bigger transactions like M&A, as Henrik touched on earlier. Also, it should contribute to our improvement in SG&A as a percent of revenue, something we keep a close eye on because we need to be very efficient there as we grow revenue, ensuring that the fixed costs do not run away. With that, I want to finish where Lars started. About Ferronordic as an investment. We believe that we have a very robust and scalable business model. A big share of our revenue comes from the recurring aftermarket business. And that's the part with the higher margins. We believe we have a strong brand portfolio and very good relationships with our OEM partners. That gives us opportunities to grow outside our current areas, but also to achieve deeper positions in our current markets. Sustainability is an integrated part of our business. A lot of what we do is related to the circular economy. And when we sell machines or trucks, it’s either very energy efficient and very clean or it’s outright electric. Um, so on that level as well. And of course, safety is really a core tenet in all the products that we provide. Um, we believe we're well positioned for the trends that we have discussed today. On the one hand, electrification, notably electric trucks in Germany, infrastructure investment, notably the investment programs in the US, and shared asset models, which are a growing theme in our markets. So that would be equipment as a service solutions and sustainable transport, discussed by our lawyers. We are poised for growth. We believe in our markets in the US, a strong market with growth potential, and in Germany, where we have struggled with the turnaround, but we have taken measures and we believe we're now in a much better position to see improvements and to capture a recovery when that comes. Furthermore, on top of that, you would have network improvements and the integration of new products and brands onto our existing platform that complement our current product portfolio. We are open for strategic M&A when the time is right and, most importantly, when the opportunity is right. And it fits all the criteria that we have discussed here today. Um, we have an experienced management team that we believe is able to execute this strategy. Um, so with that, I think we can move to a final Q&A for which we have at least 12 minutes. So, I would invite my colleagues to the stage.
And.
Be very happy. Thank you, Julia. To take questions both from the audience here and online.
AB Volvo makes tons of money. And possibly also your other suppliers. Ferronordic does not. As an outside observer, one might suspect that the pricing between AB Volvo and themselves is somewhat unfair. Is that something that can be rectified?
Well.
I think we're in a good position with Volvo. I mean, we have a—they’re not treating us in that respect any different than any other. Um, we obviously agree that we think we should have more. There is no question about it. Um, but it's a give and take. And I mean, there is, of course, a dialogue on how we handle pricing in a market that fluctuates. So it's something that we discuss all the time, obviously. And particularly, I mean the last examples, as we all know, are what's happening in the German market, where you would then have had a situation where demand was much higher than supply, thus creating a certain situation. And then you come to a situation where it's the opposite, and you need to adapt to that and create another scenario. So, um, that's our industry. That's how our industry works. We just need to be very, very good at adapting to the conditions that are there. And again, frankly speaking, it's in the service and parts business and the relationships with the customers where we make money. And we should be able to do that. Even in Germany.
Uh, yes. A couple of questions on the targets and then perhaps a general one as well. First of all, looking at the segment level, what are the underlying assumptions for the different segments to arrive at a group margin of 6%?
Um.
Thank you. I was expecting that question, Adrian, but, as it often is the case, we don't provide sort of the detailed forecast for the respective segments. I think we had a question also online regarding the relative profitability. And I think that is as much as I can give you. We do expect profitability improvements in both segments. And by both, I mean the US and Germany. In this case, we expect similar outcomes in Kazakhstan as well. But these are the main segments. And the question online was: do we expect Germany to reach US levels of profitability? And the answer is no. It's a different market. We do expect Germany to improve over this horizon. Um, but we do expect improvements in the US as well. Um, but again, we don't provide the full specifics of what we expect there.
I understand; I was expecting that answer as well. So, on the organic growth target, it obviously includes opening up new workshops. Are you able to say anything about what kind of growth in existing workshops you can see, and then how much on top of that is from opening new workshops?
I would say that this is based purely organically on what we have at the moment. So I think you will find this to be a bit of a gray area. At the end of the day, if we open something, how far is it from, as I said, adjacent to our area. So if it's in immediate connection, that would also be included. But the way we have built our model and looked at the different scenarios, this is based essentially on the footprint we have now. So being able to further elaborate on the footprint we have now could add some extra potential. Henrik, as previously discussed, presented some additions to the US that we are considering, which are largely accounted for in the forecast we provided.
Okay, understood.
Targets that we have provided.
Yeah, uh, and one final, more general question. There wasn't a lot of talk today about establishing a contracting services model in the US, Germany, or Kazakhstan for that matter. Is there any update you can give us on that?
I think when we talk about contracting services, the concept is the same as what we discussed regarding sustainable transport services; it involves taking an additional step, either down or up. You see the value chain and actually perform services that normally our customers would perform. So I think the concept is the same and it's just in a different form and shape, trying to offer a different proposition to the market. But we're doing it more to understand ourselves, what's happening, and to try to fill a gap that our customers are not prepared to do. Um, so it's a similar way. It's just different. Different. We simply call it something else.
I understood, thank you.
My name is Marcus. I'm a private investor. If you look back at the German journey, would you have done anything differently? It's easy now, but do you regret some things you've been doing? What would you do differently?
I have a saying for all my staff; I always say I love mistakes because if we don't make any mistakes, we're not learning anything. And of course, we made mistakes in Germany. Of course, we made mistakes in Russia. I make mistakes every day. So yes, we could have done things differently, of course, for sure. But I don't think we actually regret much of what we had. I mean, we couldn't help COVID. That was something else. We couldn't help the invasion of Ukraine. Unfortunately, there were things out of our control that we hadn't planned for when we acted. So I think in terms of what we have done, I think we've done the right things. They've just taken too long to execute. Simply, and I think we could have done things differently. But overall, the strategy we had is still valid. And I said it still stands. We just need to implement it and it needs to take hold, get a foothold, and establish a position. And then we're there in Germany. It's not too far away, actually.
Thank you. The second one regarding the performance glitch in Germany suggests it might be an under-invested market. Or is it more like a boom and bust, which has nowadays become more neutral when it comes to trucks?
You mean the decline in sales?
Yeah. You observed an increase in sales during Covid. There were three bad years in the German market.
We usually say that Germany is a very stable market, actually. Um, no, I think it's very stable, actually.
It's more like a general question. Is it under-invested or is it perfectly fine? At this point.
The truck population and the fleets, depending on the activities and, broadly speaking, the economy in general, reflect what we observe in terms of their significant role in international transport, among other factors. But it's the biggest market in Europe. I couldn't say if it's over or under-invested, but clearly our customers buy if they think they need to and additionally, if they want to expand. However, if they go bankrupt, they will probably not buy. So the market is the market, I don't think. I mean, 2021-2022 is what I'm talking about. It was due to COVID. There was not enough supply to meet the demand in the market. You see three years of this. And then, that demand overhang obviously creates an enormous effect on the total market when those hurdles finally disappeared in 2020 and in 2022 or 2023. This, this is Covid. So, in general, as you can see, it is usually quite stable, really.
Any more questions in the audience? We have a question online asking us to comment on the competitive picture in the US in our sales area. Perhaps something about competition, brands, and other players?
Well, the competition in the US is, of course, also very tough. It's the entire market of Caterpillar, which is unfortunately the largest construction equipment manufacturer in the world. Followed by John Deere, which is also a strong competitor, also from the US. Um, but despite this, we are doing well with Volvo.
Uh, another question. I think you can take Henrik. It relates to, uh, Vic's answer. Um, he provided his view on things that they've done differently since we took over, in terms of initiative changes that we have brought to Rudd. Anything you would comment on there? Uh, as the new owners, we have tweaked or changed things.
Well, I talked a bit about concrete projects that we are working on with the Automatic Generator and introducing and developing digital tools. Um, I think overall more, maybe a bit more scrutiny on the efficiency of usage of assets and inventory, turnaround and receivable turnaround. And, just for Rudd to be part of a public environment where our numbers are scrutinized in much greater detail than they are used to. So that's a change for them. But, um.
Yes, a question on the potential for equipment as a service in the US, contracting services. And we touched on sustainable transport services.
Well, I think, I think what we're doing with developing the rental fleet is very much driven by the equipment-as-a-service trend. And, I think we will offer customers even more flexible solutions as part of the rental business in the future. And I don't exclude the possibility that we might move ahead with providing services ourselves at some point in the future. I mean, at the end of the day, nobody wants a drill. Everybody wants a hole, right? So that’s the solution?
Yes. On that note, I'll take one question also on the rental model itself in terms of how it impacts the numbers. Um, so a bit more technical, one, but, um, the rental fleet in the US goes into PPE, property, plant, and equipment. Um, so it is CapEx when we buy the vehicles, they go into property, plant, and equipment. We depreciate them over time. And when we sell them, there is a difference compared to the book value that we have left. Net book value, of course, less the depreciation. Um, and, you know, the item goes off balance sheets once it's sold. So that's, uh, yes, what we had. And we have a question on the Volvo and Renault relationship and pricing. But I think we covered that one as well. I think we covered most of the items, and I see also that we hit our time one minute past. I would probably just give one more chance, both online and to the audience here, if there are any more questions or more than two more.
Thanks. I'll take a quick question just on the tractor market, where the aftermarket potential is maybe a bit less than in rigid trucks. I mean, I assume you've been focusing on achieving a better mix here. Could you elaborate a bit on that? Exactly what that entails. Um, and kind of split out the electric vehicle part of that. And, the other part of getting a better mix.
Do you mean a mix between rigids and tractors?
In tractors, how are you working to achieve a better mix?
Better over time. Okay. Um.
No, I mean, I think what you mean is how we try to increase the rigid segment. So, you would have a tractor which is driving on the highways. You would have, very bluntly, long-haul. You would have a rigid that is more localized. That is forestry, tipper trucks driving sand, gravel, demolition, refuse trucks, recycling, etc., etc. And that's what you want to keep. So I mean, we are just employing people and focusing on reaching customers in those segments where we have not been successful before, and where the competitors are present. And that’s what we do. Volvo and Renault have good trucks in those segments as well. It's just that we haven't really focused on getting there. Getting in there, that's about it. And it's not so much that the potential per year is bigger, but rather to just stay longer in our network in the aftermarket. You see what I mean? So, the older they get, the higher the potential. So, that's how the calculation goes. So that's why we want to increase our focus on rigid trucks. And also, we want to target the local aspect, you know, because they are local. They don't go to a dealer in Poland when they're out traveling; they come to us. So that's why we really want to have that local population.
So, essentially, more targeted and increased awareness around it. Yeah.
And also, training our own sales team and our own people to talk about these rigid trucks, because there are different types of customers. I mean, at the end of the day, what our trucks are doing is making money for our customers. And then we need to understand how they are making money for the customers. And we need to understand how we can perform differently to make more money for the customers. That's what we talked about in the beginning, and that's how we sell. We don't just sell; we sell a product. You know, we sell something that is vital for the customer's profitability. Now, how can we make more profit for the customer? And these are the sales guys who are going to convey that to these customers. And they need to understand what they are talking about. So preferably we would like to attract salespeople who are already working in that segment and in that sector and who know how these are operating. Because it can be small things that make a huge difference for the customer. Sorry for the long answer to that, but it's, um. I'm quite passionate about this.
I'm quite passionate about reading. Yeah.
Just a comment on the rental business. I used to follow Atlas Copco for many years, and at some points in time, they decided to go into the rental business. Sure enough, they encountered various problems with that market, so it's obvious that operating rental markets requires a special skill.
Yes, it's not absolutely the same; it's a specialized skill to do contracting services or any of the services that we provide. You just need to be the best at it. Then you don't do that. If you know what you're doing, then you don't make mistakes. And also, particularly in the US. And one thing that Rudd has not done. They haven't really been in that business in the way that other dealers have, even Volvo dealers, or not to mention the competitors that Henrik unfortunately mentioned here before. But of course, like any business, it can go wrong or it can also go very well. But you need to know what you're doing and you need to maintain good contact with the customers, which is key. Again, knowing your customer and understanding what's going on at their place and taking that machine back. If you see that something is not happening well, replace it, and when you see that something is performing very well, consider adding another. That's the key.
Thank you very much. Any more questions? One more here.
Yes. Thank you for your presentation. It was really interesting. Uh, regarding M&A, is there any area in the United States that is more interesting geographically if you would continue to expand?
I mean, I think that applies to geographic expansion in general. We are not categorically against anything, and we will look at everything in an opportunistic way. But the focus is to grow where we stand and to grow based on what we have, and to see how we can leverage what we have in the best possible way.
Okay, so it's not like, for example, some geographic areas in the United States have different climates or different types of mining resources that could be of interest when considering expansion.
No, I mean, the ideal case would be where to find something where we, as best as possible, can utilize the resources we have today to professionalize the business we acquire and maximize the utilization of the resources we have.
Okay. Thank you.
Any more questions? Maybe one last question.
And I'll see.
Just refresh here. No, um, no new questions online either. In that case, I thank you very much for coming here today. Both those of you who came here and those who are online. Um, and again, thank you very much for your interest in Ferronordic. If you do have follow-up questions, you can reach out to me at er@ferronordic.com. Uh, thank you very much, everybody. Thank you.
Thank you for coming. Thank you, thank you.



















