Hello everyone, and warm welcome to engcon's presentation of the first quarter of 2024. My name is Krister Blomgren and I'm the CEO here at engcon. With me today I have our CFO, Jens Blom. Together we will take you through the highlights of the quarter and then we will move on to the Q&A session. So let's start with the innovation and conservation then. Innovation and conservation are to change the world of digging. So far, we have entered 16 markets from North America to Australia. The penetration rate is approximately 2% of all the world's excavators. So a lot of potential left. And we can see that we have started to change the world of digging with our donut chart. We reached a milestone last year with the Nordic market or region at 43%. That's the first time ever the rest of the world was over 50%. Our biggest growth region and also where we have come the furthest is Europe, where we had 34% of our revenue last year, and America has also had good growth last year and ended up at 15% of our revenue. And the smallest region so far is Asia, saying that ended up at 8% last year and some short facts about last year. We ended up at approximately 1.9 billion in revenue. We had a dip in our growth path with the -6% growth the year before, so we had an average growth above 30%. We had a good profit level at 20% EBIT. Even if it was a turbulent year, 2023. We're moving on and talking more about our highlights in the quarter. For the fourth quarter in a row, we see continued stabilization. There are increasing signs that demand has bottomed out and is now on the rise. The European region is showing clear signs of strength, with a sharp rise in order intake, more new customers, and higher activity among major customers. Europe had also another strong quarter on order intake. And to make it even more positive, most of our countries contributors contribute in a good way. We also had a trend break with the net sales increase from last quarter after three quarters of a drop. And after a really weak Q4, we are now back on a more healthy, profitable level. We are approximately 15% on an EBIT level. And, innovation is key to success. And we have always strived to be at the forefront of technology within engcon. During the first quarter, we filed a patent application related to a self-learning configuration system that will be together with our third generation tiltrotator. And I will delve a little deeper into our third generation on the next slide here. We are launching our third generation tiltrotator. Sales have started in Q1. And we start with our top seller size EC219. That's for excavators up to 19 tonnes. Our key unique selling points for the third generation tiltrotators are that we have this self-learning configuration system. This will simplify installation and optimize the configuration between the tiltrotator and the machine, saving energy, increasing precision, and providing an optimal experience for the operator. An optimized third generation tiltrotator compared to a good configuration. Generation two saves a minimum of 30% energy for the tiltrotator. With this self-learning program, we will always get the optimized installation on the third generation tiltrotator. The second generation is more dependent on the skill set of the installer, so that's why it can vary a lot more compared to the third generation, where the skill set of the installer doesn't matter. We have a program to fix that. And we will also save approximately 50% of the installation time. And we will also simplify it so it will require less skill set to do that; this is a normal bottleneck for us in new markets. So that's why it's really important that we have achieved this with our new tiltrotator. In our third generation, to date, we have achieved higher flow through the data. So we can use even more different types of tools that need high flow. And this makes the excavator the perfect tool carrier, or the Smith or the Swiss Army knife, or whatever you like to call it. But it will be even more useful for different tools, and we probably can replace even more other machines in that way. And our new app will be available both for iOS and Android. So now more or less everybody can get remote support. We also have that feature so the operator can customize the settings depending on how he wants to have them, a little bit like in a car. When I push a button there, I get the seat settings, the steering wheel in the right position, the mirrors, and so on. Here in the excavator, you will get the right speed on the tilting or rotation or whatever you want to change with that. But so you will get that every time you step into the machine, even if somebody has changed it before. We also have it prepared for electrified and autonomous and semi-autonomous excavators. The important thing for those electrified machines is that we are using less energy. And for those autonomous machines, smoothness is the key. We also have load sensing technology together with the new software or control system, DC3. That's where the smartness is. The control system controls the load sensing valves and makes everything smooth and efficient. With all this new technology in the third generation tiltrotator. It is a little bit like what Tina Turner would have said. You're simply the best, better than all the rest. I was looking into the Q4 figures, or not. Q4, Q1. A brief overview of the Q1 figures. Sorry. If looking at the organic net sales, there's a decrease of 43% compared with last year. But that's when we reported exceptional deliveries and broke our sales records. Sales have declined from this record level in 2023. But pleasingly, this quarter breaks the negative trend. Taking a look at the organic order intake. We can see a small increase from last year. This is yet another sign that the demand has bottomed, and it's now on the rise. And we also see a strong recovery in our growth rate in Europe that I will come back to later on the gross margin level reaching for 2%. And it's an increase from the previous quarter. And it's now at a good level. EBIT margin is back at a healthy level. 15% EBIT, and this is mainly due to increased revenue and strong cost focus. The growth amounts to 28%. If we take a look at the order intake and the net sales. And we are having a growth trend in the order intake. We reached for another 10 million in this quarter. Which is actually a modest increase compared to last year. And if we also exclude the effect we had in Q4 2023. We also have a trend break, as I mentioned earlier with the net sales. It's going up this quarter after three quarters of dip and reaching 394 million SEK. You can also see that we built a small backlog to build the last two quarters, and we will dig in deeper into both net sales and order intake in the regions in the coming slides. And we're starting with the Nordics. We're having a positive trend in the order intake for the third quarter in a row. It's a little bit of mixed signals with Sweden and Finland having a stronger positive trend than Denmark and Norway, and Denmark and Norway were a little bit slower into the dip and are not yet out of it. So we still have a lot of growth left in this region, both in Sweden and Finland, but especially then in Denmark and Norway. And the Nordic region is our most cyclic region. And here we need some positive, uh, macro signals to get the big increase. The signals we see so far are mainly from Sweden then, where we're talking about lowering the interest rate, maybe as early as in May, otherwise most likely then latest in June. And hopefully, the others will follow so that the residential, commercial, and industrial buildings can start all over again. Another thing that is important right now is also that the dealers have excavators in stock, so it's important to have short lead times in production. Moving over to the Americas. And, uh, here we have had the first on-site spring training with John Deere. We've been having digital, uh, trainings before during the Covid, and last year there was no spring training because of the expo. John Deere invited all their dealers. They have more than 1500 dealer sites down to Arizona. And we have trained them on the benefits of the tiltrotator. They also have tried the tiltrotators. This will spread the awareness of tiltrotator to the dealerships within John Deere, and hopefully they can spread it further on to the end customers also. Our service organization in America is now on pace to meet their customers' demand. We have sent senior central resources to North America that earlier have worked on growth markets and understand what customers need in North America. I feel positive that we'll be back pretty soon with the best service and support. If you look at the trend for both order intake and net sales, we can see that we still have a negative trend. Our sales cycle is normally 3 to 6 months from start to an order. So it will take some time before we see any bigger results. During this time, we have been running sales training for our staff, also pushed extra for our go-to-market strategy and the focus on the end customers. And we think that will also pay, uh, yield results later on then for us with and I think we will bounce back. We need to make a couple of adjustments and keep grinding. If it was easy, everybody would do it. Association in association. We have two. Really? Really strong quarters in a row. All countries in the region are doing well. Korea and Australia, where we have our own sales office. We now have a good sales organization and they have the right focus, working with the customer and building the market from the bottom up in that way. Both markets, Korea and Australia, show a record high Q1 in order intake. And we also have signed a new non-exclusive agreement with our distributor in Japan, which gives us the opportunity to be more active in the Japanese market and work with more partners or by ourselves. This region is becoming more and more important for us. The order intake in this quarter is around 40 million. We also have a positive trend on the rolling 12 for three quarters in a row. So associations have been experiencing a couple of strong quarters here and hopefully will continue with that. We're moving over to Europe. Here, we also are having two strong quarters in a row from the European region, underscoring that most of the other countries are doing really well. France has started really strong and also has the INTERMAT right now, actually in Paris. We're having a good trend on rolling 12 months on the order intake. And another positive thing is also that all this has happened without any major positive macro trends. Except that the risk of increased interest rates is gone. The feeling is that the tiltrotator is becoming a more established product in more and more countries in Europe. Europe is now our biggest region in Q1, with 41% of our total order intake. Europe is also the biggest region on rolling 12 months, with 608 million, or 40% of our total order intake. So Europe is becoming more and more important. Or actually, it is the biggest one and that's why it is so important. And all this with a lot of potential left in Europe since most of the countries still are under a 10% penetration rate. And speaking of penetration rate, if you take a look at this graph. That shows the penetration per market. We can see that there is a lot of opportunities left. And the growth regions that are closest to reaching the tipping point are Europe with the Netherlands in the front, but also the bigger countries like France, Germany, and the UK are right there. So in the short term, Europe is important for our growth. We can get the bigger volumes there faster than from the other growth regions. America and Asia. Australia will also follow, but they are some steps behind. Another thing that also speaks for Europe is that we have the sales organization, we have the management, and we have the service network in place in Europe. And we have historically been weak in the DACH region. But with the strategic partnership with ZD – Solution KG in the DACH region from last year, we are much stronger there too. And Germany is the biggest excavator market in Europe. So that's also really important and a big step for us. Uh, and also the awareness of the system has spread more widely. And we see that even the rental companies are starting to invest in tiltrotators in Europe. And with that, I will hand it over to Jens, who will guide you through the financial performance in more detail. So go ahead, Jens. Thank you. Um, we start by looking shortly at the EBIT.