Good morning and welcome to the Engcon Q3 report presentation. My name is Krister Blomgren and I'm the CEO here at Engcon. And with me today, as usual, I have our CFO, Marcus Asplund.
We will guide you through our Q3 report and also answer questions in the Q&A afterwards.
With that, we jump into the presentation.
This was a good quarter for us.
In fact, our order intake reached record levels.
We have never seen this kind of performance in the third quarter before, which is fantastic.
Europe really stood out, matching its peak at 206 million SEK. What is great is that it wasn't just one country driving the results. Several of our key markets performed well at the same time, which shows the strength of our overall position in the region.
Asia-Oceania also had a really strong quarter. We secured major orders in Japan, and overall momentum in the region continues to look very encouraging.
And even though the big orders will be delivered into the market in 2026 and therefore impact early 2026 order intake in Japan, we still expect demand to strengthen further as the government incentive programs get underway after the turn of the year.
On the operations side, we faced some challenges with scaling our output and managing supply chains, which held back our delivery potential a bit, especially in Europe. However, we have made solid progress and we are now fully focused on strengthening our operations so we can turn our growing order backlog into actual sales and keep our customers happy.
Strategically, we made some really important moves this quarter. We entered into partnership with two major excavator manufacturers, Hitachi Construction Machinery and Avalon.
We are now one of the preferred suppliers in the European dealer network, which is a big step for us. And with Develon, their nine series excavators are included. We come out already right from the factory, which will really improve efficiency and make installations much faster.
Finally, an updated market study conducted by Strategy& confirms we have strengthened our market position and continue to gain market share.
Even more exciting, there is still huge untapped potential out there in the Tiltrotator market.
So now I will show you some highlights from the market study that Strategy& has updated for us until 2030. This slide shows how market shares have shifted among the key players in our industry over the past few years. What really stands out is that Engcon isn't just holding the number one position; we have been strengthening it since 2019. We have expanded our lead by approximately five percentage points.
In other words, we are clearly the winner in this market landscape.
At the same time, we see that not everyone has been able to keep up with the overall growth in the market, and that's why our lead continues to increase. Of course, market dynamics vary from country to country, but the overall direction is unmistakable. We are growing faster than the market and we are widening the gap to the competition. We are really proud of this development. It proves that our strategy is working and that we are growing faster than the market, which is exactly what we set out to do. So on this slide, Strategy& has forecasted the growth for us, and even with everything we have achieved so far, it's clear that the biggest opportunities are still ahead of us.
The market continues to show incredibly strong growth potential. It's expected to expand by around 20% per year all the way through 2030.
By then, the market is projected to exceed 6 billion SEK.
And that's just the Tiltrotator segment alone, not counting the broader attachments or aftermarket opportunities that come with it.
This shows just how much room there still is for us to grow, both by increasing our penetration in existing markets and by expanding into new regions.
So while we are proud of how far we have come, we are even more excited about what lies ahead.
The long-term outlook for Engcon and for the entire Tiltrotator industry remains extremely strong.
This slide from the market study takes a closer look at the market penetration.
How filtered data is adopted in the regions where we are active, and how that's expected to develop through 2030.
What's really exciting here is that there is still a huge potential ahead, even in the markets where we already have a strong footprint.
The biggest expected growth will come from Europe outside the Nordics, which is projected to account for about 60% of total unit growth between 2024 and 2030.
Germany and the UK stand out as the two largest markets in Europe, both showing strong expected penetration growth by 2030.
We also expect France and Germany to reach the tipping point, where the Tiltrotator starts to be seen as a standard piece of equipment, not just an optional add-on. What's less visible in the chart are the smaller percentage increases in large markets like North America and Japan. Both these movements are extremely important. Even a small shift, say from below 1% to around 4%, will have a massive impact on total Tiltrotator sales.
Japan, in particular, is moving quickly. The adoption there is really standing out, helped by strong government incentives. Altogether, this journey will almost triple the size of the Tiltrotator market by 2030, which is fantastic news for us.
And as the clear market leader, we are poised to capitalize on this growth opportunity.
But what's even more remarkable is that even at that point, in the year 2030, about 93% of the global excavator market will still be unpenetrated.
So our journey doesn't stop there.
In 2030, we're still really just at the beginning of our growth story, which will continue for many, many more years to come.
Then.
If you're moving back into the report then, and taking a look at the key figures for the quarter. Net sales were roughly flat compared to last year. We are seeing very strong demand, especially in Europe, but some of those orders have been held up in production. We haven't reached our full delivery potential in Europe yet, partly because some of our capacity has been tied up in the Nordics and for overseas markets. Those markets tend to plan further ahead, while Europe typically has more short notice demand orders, which makes production planning more challenging.
On top of that, we have had some disturbances with component availability, which reduced our capacity slightly during the quarter. At the same time, we have been ramping up inventory and focusing on deliveries to overseas markets, which has also put some short-term pressure on Europe. The good news is that the order intake remains strong across all the regions, up 31%.
In fact, this was our best third quarter ever, and Europe matched its all-time high for a quarter. Our gross margin came in at a solid 43%, a level we are comfortable maintaining over the long term.
And Marcus will guide you through the financials in more detail shortly.
Now that we have covered the KPIs, let's take a step back and look at the bigger picture, specifically how our order intake and net sales are developing. Order intake came in at 467 million, which is actually the strongest third quarter we have ever had.
As I said, demand remains very solid across all regions. Net sales landed at 450 million, so they are essentially flat compared to the previous year. And if you look at the graph, it's clear that we are not yet seeing the full impact of deliveries.
Some of the order intake, particularly from Europe, is still sitting in the order book waiting to be delivered, and we are now fully focused on ramping up operations to turn our growing order backlog into actual sales and to keep our customers happy, as I mentioned earlier. So with that, let's dive into the regional performance and see what's behind these numbers.
Let's start with the Nordics, which continue to perform strongly in the third quarter, both in terms of order intake and deliveries.
We are seeing a clear improvement compared to last year, driven by a few positive factors.
It's lower interest rates that are boosting investment appetite.
The excavator market is recovering, something we can also see reflected in Volvo CE's report and among dealers. Inventory levels have now returned to more normal levels. On top of that, we have had some individual deals and slightly higher volumes spread across the region, which have added to the momentum.
That said, the higher volumes are coming from markets with slightly lower average margins, which gives us a bit of a negative mix effect compared to last year, and Marcus will guide you more regarding that later on. And looking ahead, we expect the Nordics to grow in line with the excavator market.
Turning to Europe. We had a really strong quarter in terms of order intake, matching our previous record of 200 million SEK for a quarter. What's encouraging is that this strength is broad-based.
We are seeing solid performance across most of our key markets, even though the construction sector remains relatively weak and there is some political instability in parts of the region. Despite that, demand for our products continues to grow.
During the quarter, we have been very active, participating in several local trade fairs and visiting customers, and we are clearly seeing the result of that as our market penetration increases. Demand continues to build. Europe's intake is very strong, but net sales are slightly behind.
That mainly comes down to timing.
In the Nordics, customers plan early ahead of the season.
In overseas markets, we build inventory first before those products reach end customers. But in Europe, orders come on much shorter notice, which is great for demand but harder to plan capacity for in the short term. And the race for our largest region, as we talked about in the beginning of the year, is still very much on when looking at the rolling 12-month order intake. Europe has now overtaken the Nordics as our biggest region, given our strong position in Europe and the fact that this is where the greatest growth is expected through 2030.
We feel very confident about the long-term outlook for Europe.
If you take a look at the Americas, we are seeing an increase in order intake from low levels. The levels are partly boosted by the tariffs imposed, and the price challenges in the market persist as things stand. There's significant uncertainty, primarily related to tariffs, but also concerning the broader economic outlook.
This creates a cautious market and, as a result, slower demand for construction equipment. It's a wait-and-see situation for both our customers and us right now. But we are ready when the market turns around. We have strong confidence in this market long term.
It's a large excavator market with low current penetration, and that gives us significant growth potential ahead. And now over to Asia Oceania. And here we are seeing very strong order growth in the quarter. This region naturally shows bigger swings from quarter to quarter simply because the baseline is still relatively small. That means individual deals can really move the needle.
And that's exactly what we have seen this time with large block orders in Japan driving the performance.
There is strong government support in place for investments in productivity through the MLIT and SME programs. As we discussed in earlier calls, the update here is that the program start has been pushed to January 2026. Japan is the world's third-largest excavator market, so even a small penetration gain translates into meaningful growth for us. We expect the market to develop in line with our long-term company targets, though not at the exceptional level we saw this quarter.
With that. With this, I will hand it over to Marcus.
That will guide us through the financial development.