Hello, everyone, and welcome to the Addnode Group Interim Report presentation for Q3 2026. I am Johan Andersson, CEO of Addnode Group. And with me, I also have our CFO, Kristina Elfström Mackintosh. Today we are going to talk about our third quarter 2026. We will provide an introduction to that and some further clarity. And then we'll end up with a Q&A.
You will also see some supporting slides in the appendix. For those of you who are new to Addnode Group, I would like to start with a short intro.
We provide software and digital solutions in selected niches. Our 20 companies are organized in three divisions in order to support each other and take advantage of synergies. The three divisions are Process Management, Product Lifecycle Management, and Design Management. Our software and digital solutions help build a more sustainable and efficient society. From zoning and planning and building permit software for the public sector in the Process Management division to digital solutions for designing, building, and managing infrastructure and products, including lifecycle management in our Design Management and PLM divisions, we are building Addnode Group on three competitive strengths: our domain expertise in selected niches, that we provide mission-critical software with high switching costs, and that we are the trusted partner to our customers. Addnode Group has about 40,000 customers. Net sales of 6 billion SEK. A business model with 62% recurring revenue. And we have a healthy EBITA margin of around 16%. We are active on five continents. The majority of our business is in Northern Europe and North America. And we have done 96 acquisitions since the inception of Addnode Group in 2003.
So, let's look at the third quarter performance. Q3. We had organic growth, acquisitions, and cost efficiency initiatives that contributed to significantly improved earnings in the third quarter. Net sales increased by 10%, of which 3% was organic growth adjusted for positive currency effects. EBITA increased by 68% to 250 million SEK. All three divisions improved EBITA, which supported the improvement of the EBITA margin to 17.4%. Operating cash flow improved by 73 million. Please observe that the third quarter is the lowest quarter of the year, as we receive most of our prepayments in Q4 and Q1. We also secured the largest single contract for our own software in Addnode Group's history. In the quarter, we acquired SpaceIntel, an AI-enabled software for facility management, and increased our investments in Bimify and InUse. When comparing with last year's Q3 in 2025. Please observe that renewals of some Autodesk agreements were made by customers in the second quarter instead of as expected in Q3. This boosted Q2 last year by roughly 80 million in net sales, with the corresponding negative effect in Q3 last year resulting in a zero effect for the full year. So it was just a timing difference between the quarters. But as you can see in the graph to the right, showing net sales and EBITA from 2021 to rolling year-to-date 2026. Addnode Group is now back to year-on-year growth for both net sales and EBITA; rolling 12-month year-to-date net sales were almost 6 billion and EBITA was 970 million. I will now move to the performance of our three divisions. For those of you who follow Addnode Group regularly. We usually start with Design Management, but today I am going to start with Process Management to the left. Net sales increased by 6% to 417 million. Organic growth increased by 4%. As I described earlier. Sokigo, a company in the division Process Management, secured a strategic contract when the City of Stockholm selected our standard solution for building permit management.
The contract has a total order value of roughly 100 million SEK over a period of ten years.
It confirms the division's strong market position.
EBITA for the division increased by 16% to 100 million and EBITA margin increased to 24%. Acquisitions and improved operational efficiency contributed to the improved margin. The EBITDA margin has improved for the ninth consecutive quarter, demonstrating the division's ability to combine both growth with increased profitability. And now, the Design Management division in the middle of the slide. Net sales increased by 21% to 595 million. Demand for both software and services remains strong in the US, where investments in data centers are a key driver of growth. The comparative figure for the preceding year, as mentioned, was impacted by the timing of renewals of Autodesk agreements. EBITA increased by 184% to 122 million, and EBITA margin increased to 20.5%. The improvement in EBITA was driven by a combination of easier comps as described, organic growth, acquisitions, and efficiency measures implemented in both Europe and the US. The efficiency program that started in the second quarter has been completed. It will reduce the cost base by about 100 million on an annual basis, with about half of that reduction expected to take effect in the second half of this year, and the other half in the first half of 2027. And finally, the Product Lifecycle Management division. Net sales were unchanged at 436 million. Organic growth decreased by 3%. Strategically important customer segments, such as aerospace and defense, remained in strong demand. We had a solid quarter for the Nordics, Benelux, and the United States. The German market is still stagnant. EBITA in the division increased by 10% to 46 million SEK and the EBITA margin increased to 10.6%. We have a clear focus for the division to improve margins. This has been successful and we have improved EBITA. For example, you can see that the number of full-time employees is 14% lower compared with Q3 last year. The aerospace and defense industry is an increasingly important growth market for the division, where technical, deep domain expertise, a comprehensive offering, and global service capabilities position us strongly to capture these expanding opportunities. And we are diversifying in Germany from automotive to aerospace and defense and other customer segments. And just to stop for a few seconds, I mentioned this record deal with the City of Stockholm valued at 100 million. It is a clear testament that our customers are investing in software that we can support over time. It is our largest owned software deal for the year. It also manifests the strong position that we have in the market for the public sector and the technical part of municipalities in Sweden. It's also something that adds to our base of recurring revenue as this is a ten-year contract, meaning that we will have recurring revenue of roughly 10 million from this contract for the next ten years.
So I think it's a good testament to the good work and the market position that we have in the division, Process Management.
So we also made some investments in the quarter. We are investing in technology and AI to leverage our global market position. We have made some acquisitions in the Design Management division, where we acquired SpaceIntel in the quarter. It is an AI-enabled software platform for facility management. And we also increased our investments in Bimify and InUse. And in the beginning of the year, some of you might remember that we acquired a company called CAD-plus. Together, these investments provide us with innovative solutions for the digitalization of buildings, smart property management, and connected industrial environments. By combining these companies' technologies with the Design Management division's strong market position, extensive customer base, and global sales organization, we have a good foundation to accelerate market penetration and boost our recurring revenue. A concrete example of how we can already see the value of these investments is our solution for Technology University Dublin. And that is my segue to our customer success stories for this quarter. The first example to the left in this slide is the one that I just mentioned. It shows how Symetri in Design Management is supporting the Technological University Dublin. The University wants to create a scalable digital foundation for its campus operations and support its 2030 sustainability targets. We did that by bringing it all together in Symetri's Geminus platform, integrating facilities management systems, BIM, digital twins, IoT, and other data sources into an AI-powered environment that automates monitoring, reporting, and building performance optimization. This enabled the Technology University Dublin (TU Dublin) to optimize campus performance, support sustainability, and track decarbonisation progress. It is a good example of how our industry knowledge and domain expertise, combined with AI and integrated data sources, can create new opportunities to improve efficiency and further develop customer operations. The second example, as you can see in the middle of this slide, comes from Technia in Division Product Lifecycle Management. As ELECTRON Aerospace prepared for certified production of its electric aircraft, it needed a scalable, cloud-based PLM environment to manage growing engineering and certification complexity. We supported ELECTRON Aerospace by deploying the 3DEXPERIENCE platform in the public cloud, unifying design, simulation, product data, and technical documentation into a single source of truth. This gave ELECTRON Aerospace a digital foundation to improve collaboration, reduce rework, and accelerate certification and aircraft development. The last example comes from Decerno in Division Process Management.
They have been working with Fastighetsbyrån for a long time, helping them and supporting them. It's a long-standing customer relationship, but they wanted to evolve their intranet into a central knowledge hub to improve access to information on sales, administration, and legal processes for employees. We developed a solution in Sweden called Byråassistenten to act as an intelligent assistant. It is an AI-powered intranet assistant that delivers relevant answers and source-backed information through intelligent search and generative AI. This enabled Fastighetsbyrån employees faster access to trusted knowledge while providing Fastighetsbyrån with a scalable AI platform for future growth. These examples. These three examples reflect a broader trend across our business. Customers continue to invest in solutions that improve efficiency, increase transparency, and support long-term growth and strong customer relationships. Deep domain expertise and the data embedded in our solutions position us to develop and deliver new AI-enabled solutions for our customers. So I would like to hand over to our CFO, who will bring further clarity on the Q3 results.